The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for mor...Read moree security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam re...Read moremain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.
Wash water reaches different spray arms through a diverter mechanism driven by this dishwasher diverter motor. The motor rotates the mechanism to change the water path during the wash cycle, directing spray where it is needed. A failed or stalled motor may prevent switching between spray zones, leave dishes poorly cleaned, or trigger a di...Read moreverter fault message. Replacing a faulty motor helps restore controlled water distribution and normal spray arm operation. It mounts beneath the tub and responds to signals from the dishwasher controls. This is an OEM part sourced directly from the manufacturer.
This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used water from the washer tub out into a dedicated drainage system such as a laundry sink or standpipe. The drain hose may become clogged, dislodge...Read mored, or damaged by loose items like coins in the laundry or by hard impacts from outside. If the hose is faulty, you will likely notice standing water in the washer tub after a cycle, mold growth, leaking, or water overflow. It is recommended to replace the drain hose promptly if it is faulty to ensure the proper functioning of your washer.
Control water entering the tub with this dishwasher water inlet valve assembly. Its electric coil opens the valve when a cycle calls for water, then closes it to stop the flow. A worn or failed valve may cause slow filling, prevent the dishwasher from filling, or allow water to seep into the tub while the appliance is off. Replacing a fau...Read morelty valve helps restore proper filling and shutoff. Disconnect electrical power and turn off the water supply before removing hoses or wiring. This is an OEM part sourced directly from the manufacturer.
This pump casing assembly is compatible with various models of LG dishwashers. This assembly contains various components of the dishwasher pump. The pump is responsible for circulating water through the dishwasher during different cycles, such as washing and draining. The components included are the motor which provides the power that mov...Read morees the water; the impeller, which helps to expel the water through the spray arms; the seals, which help to prevent water from leaking out, and the inlet and outlet ports which are responsible for pulling water from the tub and directing it outwards as needed; and finally, the outer housing. If any of these components fail, your dishwasher will have difficulties draining, dishes will not be cleaned thoroughly, and there will be grinding and buzzing noises during use.
This micro switch detects specific positions or actions within the appliance and signals components to activate or stop accordingly. Designed for precise response, it is replaced when functions fail to trigger or operate inconsistently.
Direct wash water to the upper spray arm with this dishwasher guide assembly. It connects the spray arm to the rear feed tube and helps maintain a sealed water path for effective spraying. Cracked housing, damaged mounting tabs, or worn seals may reduce water pressure, limit spray arm rotation, or leave upper-rack dishes poorly cleaned. R...Read moreeplacing a faulty guide helps restore proper water delivery. Disconnect appliance power before installation, handle retaining clips gently, and confirm the spray arm turns freely and the rack seats fully after reassembly. This is an OEM part sourced directly from the manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel - For model number 72214673710
July 27, 2025
I need the little clips that hold the divider panels in the lower dish tray
Hi Daniel, thank you for reaching out. The holders you are looking for are part number PS12391986, PS12391989, and PS12391988. We hope that helps!
I am having to turn off the breaker, wait 10 minutes then turn back on to get the dishwasher to work.
What is wrong?
Hi Joel, thank you for reaching out. The issue might be with the main control board, part number PS12385247. It manages all the functions of the dishwasher, including washing, draining, and drying. You may need to replace it to fix the issue. We hope this solves your problem!
I need the touch board that goes at the top of the door that operates the dishwasher
Hi Jay, thank you for getting in touch. The user interface board for your model comes attached to the control panel, part number AGM75469902. Glad to be of help!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Loud noise when running - the infamous bad drive motor
34 of 39 peoplefound this instruction helpful.
Mark from TEHACHAPI, CA
Very Easy
30 - 60 mins
Pliers, Screw drivers
Replacing this pump is pretty easy. Disconnect the power and drain hose, and pull your dishwasher out from the counter. Lay it on its side on a towel. There WILL be spillage. Disconnecting the pump is simple. There are a couple hoses, one single wire connection (the thermistor) and one multi-wire plug. The pump is held in place by a
... Read morepair of thick rubber holders which can be pulled off by hand. That's it!
After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(
But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
Read less
Was this helpful?
Thank you for voting!
Dishwasher leaking; got AE error almost every other wash
12 of 20 peoplefound this instruction helpful.
Bruce from Katy, TX
Really Easy
30 - 60 mins
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the
... Read moregasket will form a better seal around the door.
Read less
Was this helpful?
Thank you for voting!
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
9 of 17 peoplefound this instruction helpful.
Lenny from KIRTLAND, OH
Very Easy
Less than 15 mins
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
My Orders
