Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72180829500

72180829500 Kenmore Microwave - Overview

Get Parts and Repair Help for 72180829500

If you know the microwave repair part you need, you can browse the list of all parts on the 72180829500, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.72

Switch,Micro

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door sw...

Order within the next 5 hrs and your part ships today!
$17.98

Filter,Charcoal

Order within the next 5 hrs and your part ships today!
$5.72

Fuse,Time Delay

The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a...

Order within the next 5 hrs and your part ships today!
$5.72

Switch,Micro

This is a micro switch, but you may also know it as a door switch and it is compatible with your microwave. The function of the micro switch is to communicate to the electronic control board of your appliance when the door is opened and closed. If this part is broken and needs replacing you will notice your timer activated but the food inside is not being heated. This part measures to be roughly 1.5 inches long by just over half an inch wide, and it is black in color. You will find the location of this part behind the front panel of your microwave.

Order within the next 5 hrs and your part ships today!
$32.77

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

Order within the next 5 hrs and your part ships today!
$11.85

Motor, AC Synchronous

If the turntable on your microwave does not rotate, or you can hear a grinding noise, the problem may be with the motor. The motor is typically located below the floor of the oven, and is accessed through the bottom. The motor is normally held in place with a retaining screw and will have two wires attached to it as well. If the motor is making a grinding noise it will need to be replaced. If the motor does not turn, you can check for voltage or continuity with a multi-meter. Make sure the power is disconnected from your microwave before beginning this repair.

Order within the next 5 hrs and your part ships today!
$22.05

Plate,Mount

Order within the next 5 hrs and your part ships today!
$4.35

Screw,Tapping

Order within the next 5 hrs and your part ships today!
$4.35

Spring

Order within the next 5 hrs and your part ships today!
$4.35

Locker

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken door micro switch. (unit does not start heating)

  • Customer: JAMES from BILLINGS, MT
  • Difficulty: Very Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 6 of 10 people found this instruction helpful
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far left side of this dif... read more

blew fuse

  • Customer: larry from LUCERNE, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
tested cap. with ohm meter which showed a short. A new HV cap., a fuse and it is working fine again. read more

microwave dish would not move back and forth

  • Customer: Susan from HENDERSON, NV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
unscrewed the bottom of the microwave and unplugged old part then took the screw out and put new one in. Super easy! read more