Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72180012000

72180012000 Kenmore Microwave - Overview

Get Parts and Repair Help for 72180012000

If you know the microwave repair part you need, you can browse the list of all parts on the 72180012000, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.35

Light Bulb - 125V 30W

This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate th...

$8.63

Filter,Charcoal

$5.72

Bracket,Idle

This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave d...

$5.72

Lamp Holder

This genuine OEM light socket provides power to the light bulb in your microwave while holding it in place. This light socket is two pronged and the bulb should screw easily into it. If your light bulb will not light, check the bulb itself and light socket’s connection. If the socket is broken, or faulty it should be replaced immediately. Make sure to remove the high-voltage capacitor from your microwave before beginning this repair.

$4.35

Damper

This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow a...

$4.35

Fuse,Time Delay

$22.05

Plate,Mount

$4.35

Screw,Tapping

$4.35

Spring

$4.35

Locker

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

blew fuse

  • Customer: larry from LUCERNE, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
tested cap. with ohm meter which showed a short. A new HV cap., a fuse and it is working fine again. read more

light bulb replacement

  • Customer: Marianne from CHURCH HILL, MD
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
very simple read more

Light bulb burned out

  • Customer: Craig from Burke, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy. read more