Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72166102500

72166102500 Kenmore Microwave - Overview

Get Parts and Repair Help for 72166102500

If you know the microwave repair part you need, you can browse the list of all parts on the 72166102500, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.85

Motor, AC Synchronous

Order within the next 12 hrs and your part ships today!
$5.72

Cable,Assembly

Order within the next 12 hrs and your part ships today!
$4.35

Spring

Order within the next 12 hrs and your part ships today!
$15.54

TRAY,GLASS

Order within the next 12 hrs and your part ships today!
$5.72

LAMP,INCANDESCENT

Order within the next 12 hrs and your part ships today!
$4.35

Screw,Taptite

Order within the next 12 hrs and your part ships today!
$4.35

Cap,Base Plate

Order within the next 12 hrs and your part ships today!
$4.35

Cover,Resin

Order within the next 12 hrs and your part ships today!
$3.81

Screw,Tapping

Order within the next 12 hrs and your part ships today!
$3.97

Switch,Micro

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Motor Burned Out On Turntable

  • Customer: Steven from Oak Forest, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 40 people found this instruction helpful
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to home depot toda read more

Arcing had caused burned turntable and melted connection to sec. motor.

  • Customer: John from MOUNTAIN VIEW, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 4 people found this instruction helpful
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchronous motor. Removed t... read more

Plate stopped rotating - discovered plastic piece that spinner fit into was broken

  • Customer: Charles from STAMFORD, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Remove 2 Philips Head screws on left side of microwave. Remove 3 Philips Head screws from bottom rear of microwave. Remove 4 security screws from back of microwave (holding the cover to frame). These are the security type tips that are like a Torx bit, but need to be hollow in middle to accommodate pin in center of screw. Then back plate of microwave wit... read more