Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72163299303

72163299303 Kenmore Microwave - Overview

Get Parts and Repair Help for 72163299303

If you know the microwave repair part you need, you can browse the list of all parts on the 72163299303, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.72

Switch,Micro

The door switch, often referred to as a primary interlock switch, provides power to the various components in the microwave when the door is in a closed position, and interrupts po...

$8.63

Turntable Assembly

The turntable support assembly is also known as a roller guide and fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assembly has 3 arms and each is approximately 4 inches long. If your cooking tray will not turn, check the support assembly for signs of damage. If no damage can be seen, check the coupler for damage.

$4.35

Locker

The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may...

$4.35

Fuse,Time Delay

$5.72

Cable,Assembly

$4.35

Screw,Tapping

$113.99

Magnetron

$17.98

Capacitor,High Voltage

$8.63

Holder,Locker

$4.35

Thermostat

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

everything worked except it wouldnt cook

  • Customer: Joseph from N VERSAILLES, PA
  • Difficulty: Very Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
tested all 3 of the door switche for continuity, the top switch was faulty, replaced it,for approx $4.00 and saved a $350 dollar microwave. read more

blew fuse

  • Customer: larry from LUCERNE, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
tested cap. with ohm meter which showed a short. A new HV cap., a fuse and it is working fine again. read more

super easy

  • Customer: Henriette from Davis, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
saved me having to buy a new microwave. It was super fast delivery, had the part the next day! Amazing service and great customer support. read more