EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

71313 (ASTCSE4) LG Refrigerator - Instructions

All Instructions for the 71313
1 - 5 of 5

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original gasket became deformed creating bad seal.
7 of 7 people found this instruction helpful.
  • Stanley from Armona, CA
  • Very Easy
  • Less than 15 mins
Soak new gasket in hot water in bathtub to soften while removing old gasket. No tools required, it was a little difficult pulling old gasket out but once you get it started part way out it will come out real easy. By the time you get the old gasket out the new gasket will be warm and easy to get started into the groove it pops into. Start ing on back (hinged) side is of door, begin pushing new gasket into groove. Work up and down pushing gasket into place working towards the corners and around to the front side of door. Your all done. This is a job I went into a little nervous thinking I might be calling a service man out to fix, but it turned out to be really easy.
Was this helpful?
Thank you for voting!
Error Code dH F
13 of 26 people found this instruction helpful.
  • Garthlette from COVINGTON, GA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in
one piece and sits on the bottom of the Defrost Element.
Was this helpful?
Thank you for voting!
Decor was broken
2 of 2 people found this instruction helpful.
  • Maryann from Omaha, NE
  • A Bit Difficult
  • Less than 15 mins
Removed the tray and snapped the new piece into place, reinstall tray and done
Was this helpful?
Thank you for voting!
The gasket was torn and leaking cold air.
2 of 2 people found this instruction helpful.
  • CONNIE from YORK, PA
  • Very Easy
  • Less than 15 mins
Pulled the old gasket out.l. Started at the top left corner of the gasket and pushed the Corning in tight and push the gasket in to the other corner down the right side th the corner, across to the left bottom corner and up the right side to the start of the beginning. Very easy installation.

Delivery was fast. Satisfied wit h part select.com. Spoke to a representative in customer service and she checked to make sure I was ordering the correct part. Very satisfied with your service.
Was this helpful?
Thank you for voting!
All Instructions for the 71313
1 - 5 of 5