7086059 Snapper Trimmer - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

Clip zone control

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found on Snapper lawn mowers, trimmers, and snowblowers. This part is made of metal, and is generally used to secure the upper handle to the lower handle. Please be aware that there are different screws used in the machine. Refer to the parts diagram to ...Read morebe sure of ordering the correct part. No tools are required when replacing this item. Simply unscrew the knob so you can remove the old part, then slot the new one into place. This item is sold individually.

This is an original manufacturer supplied replacement bolt designed for use with Snapper lawn mowers. It is generally used to secure wheel brackets to the deck. It is designed with a square area under bolts head which allows it to stay in place while the lock nut (sold separately) is being tightened. Please note this bolt is sold individually.

Rhssnb 1/4c x 1/2 gr

This metal carriage bolt is a genuine Craftsman replacement part. This item was designed for use with the snowblowers listed below and is used to safely secure the discharge chute. It is an identical replacement for a missing or damaged bolt that originally came with a new unit. Please make sure to check the appropriate diagram for your m...Read moreodel for the correct location and application of this hardware. This item is sold individually.

This lockwasher is an OEM direct from Murray. The metal part is compatible with many lawn mowers, and is sold individually. The lockwasher is most often used to help secure differential brackets. For this repair, a screwdriver, wrench and socket sets are needed.

This is a genuine item that is supplied by the original manufacturer. It is specially made for use with Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. This is one of the special hub-caps utilized to secure the wheel. Refer to the diagrams o...Read moref your model for the exact location and the correct installation of this component. This high-quality hub-cap is made of durable metal and is sold individually.