My Orders
7085910 Snapper Pressure Washer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$35.15
In Stock
Chemical Injection Kit
Part #192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemi...Read morecal Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Read less
$22.62
In Stock
Thermal Relief Valve
Part #208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually.
When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage ...Read moreto your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$6.57
On Order
Garden Hose Filter
Part #B2384GS
This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely ...Read moreinspected to keep your equipment running smoothly and to prevent a damaged filter from allowing dirt into your equipment. This part sits in-between the hose from your home and the pressure washer itself and is a genuine OEM part that requires no tools to replace or install.
Read less
$41.15
In Stock
Kit, Engine Mounting Hardware
Part #192134GS
The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.
$10.39
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
$16.40
In Stock
Nozzle, Soap
Part #198841GS
This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.
$14.51
In Stock
Kit, Ball & Spring
Part #194427GS
$173.97
Special Order
Kit, Unloader
Part #193126GS
$18.74
Special Order
Kit,vibration Mount Hardware
Part #192553GS
This is a genuine manufacturer sourced replacement anti-vibration mount which is specially designed for use with Briggs and Stratton and Troy-Bilt equipment. It is one of the mounts which helps to secure the motor to the frame. The rubber material will help to reduce vibrations from a working unit. Over time the part may wear out and crac...Read morek eventually requiring a replacement. Please note, this high-quality component is sold as an individual item.
Read less
$32.63
In Stock
Kit, Nozzle
Part #202514GS
This is available as a set that contains four different nozzles. They are authentic OEM sourced items which are specifically produced for use with pressure washers made by Briggs & Stratton and Snapper. A set of pliers might be needed during the installation process. They are made of metal and plastic and will need to be replaced if they break.
$16.40
In Stock
Nozzle, Proj Pro, Orange
Part #195983XGS
This is a genuine component which is supplied by the original equipment manufacturer for use with Briggs and Stratton, Snapper and Troy-Bilt pressure washers. The quick change nozzle delivers a consistent spray pattern for pressure cleaning applications. It provides an identical replacement for a missing or a faulty component that came wi...Read moreth the new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality nozzle is sold individually.
Read less
$9.21
In Stock
Kit, Pump Mounting Hardware
Part #192131GS
This is a genuine Briggs & Stratton replacement part. The mounting hardware is commonly found on pressure washers. This kit includes four metal bolts and washers, and is used to secure the pump on the machine. You will require an Allen or hex wrench when replacing this item. This part is sold individually.
Common Symptoms of the 7085910
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More