7085690 Snapper Lawn Mower - Overview

The tine thatching spring or thatcher attachment spring tine for your lawn mower attaches to the spring alignment rod and pulls dead grass and roots to the surface. This part is black in color and is made of metal. It is an OEM part sourced directly from the manufacturer and is sold individually. Be sure to wear work gloves when you are replacing the tine thatching spring.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

Upgrade your lawn mower with this high-quality wheel from the revered brand, Snapper. Perfectly designed to fit a variety of lawn mowers, this 10 X 1.75 sized Gray wheel offers superior durability and improved traction for effortless mowing. Be sure to put on work gloves when installing this wheel for safeguarding your hands. This Snapper...Read more gray wheel has been carefully crafted to assist your mower in achieving an impeccably maintained lawn. Effortless to fit, this wheel unlocks your ability to swiftly maneuver through tougher terrains with ease. Get your Snapper mower running like new again with this indispensable wheel replacement.

This driven ring is an OEM part direct from Snapper. The flexible plastic ring is compatible with many lawn mowers. This item is often fitted between the driven disc assembly and ring retaining plate, assisting the drive disc with propelling the mower. A screwdriver, wrench set, pliers are needed for the repair. This item is sold individually.

This is a original manufacturer sourced replacement part used on Snapper lawn mowers. This is the ground drive belt that connects the engine crankshaft pulley to the transmission pulley. This part is made out of rubber and it is sold individually. Clean the pulleys off before installing the new belt to ensure top performance and longevit...Read morey with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a wrench and a screwdriver.

This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually ...Read morerequiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.

The Chute Plug is a plastic, black, individually sold part which covers the grass bag chute and is rated as "Easy" to install. This is an OEM part and if broken, it should be replaced. Refer to your make, model and diagram to ensure you've chosen the correct part.

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This OEM hub cap keeps debris out of the hub and axle of your lawn mower. It is black in color, sold individually, and made of plastic. Over time, your hub cap may get removed or damaged due to fatigue and wear. If you notice it is missing or damaged, you will need to replace the hub cab. This is an easy repair that just requires the us...Read moree of a flat blade screwedriver for removal, and a rubber mallet for installing the new one inside the wheel hub.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.