7081940 Snapper Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Clip zone control

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

It is a genuine OEM sourced part that is specially produced for use with Murray and Snapper lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality carriage ...Read morebolt is made of durable metal and is sold individually, keep in mind the washer and other parts are all sold separately.

This is a genuine Murray and Snapper replacement part for use in lawn mowers and lawn tractors. The cap screw attaches to the idler pulley. A wrench may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it strips or breaks. This item is sold individually.

The wing-nut is made out of metal and attaches to various other parts. It is a genuine OEM sourced part which is specially designed for use with lawn tractors made by Snapper and Simplicity. This part is available as an individual replacement even though several may be needed. It will need to be replaced if it becomes broken or stripped.

It is an authentic OEM item that is designed for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. It is a standard hardware which may ...Read morehave multiple applications. Make sure to check the appropriate diagrams for your specific model for the exact location and the correct application of this cone washer. Note, it is made of durable metal and is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.