7081420 Snapper Tiller - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This rear axle, thick flange boot, also known simply as the boot, protects the rear axle of your riding lawn mower/tractor. It measures 4.75 x 3 inches, and is black and made of plastic. This part can dry out and crack due to fatigue and wear; you may notice a rip in it, and debris entering the hub of your mower. When this occurs, it is t...Read moreime to replace the boot, which our customers rated as a medium-difficulty repair. You will need to attach your new boot to the rear axle of your machine, and the repair will require a screwdriver, pliers, a socket set, wrench set, and snap ring pliers.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This OEM plug is sold individually and measures just over an inch in diameter. It attaches to the case cove of your equipment, is black in color, made of plastic and will need to be replaced when the old plug is dry out, cracking, or generally showing signs of wear. You may observe grease leaking out if this part needs replacing. Dirt c...Read morean also get into the case if it is cracked, and cause problems over time such as a grinding noise. This is a somewhat challenging repair that requires a screwdriver, pliers, and a wrench.

The V-belt is an essential part for driving your tiller. This is an OEM V-belt, 0.5x62 inches in dimension, and black in color. Made of rubber, the V-belt can crack, fray, and wear over time and due to excessive stress. When this occurs, your tiller will no longer move and you will know to replace the V belt. This is an easy repair that...Read more just requires a pair of pliers to carry out. Attach the new belt on the drive pulley from the engine, ensuring you release tension on the idler pulley when installing.

This is a genuine OEM supplied replacement part which is specially designed for use with Snapper tillers. The control cable stops the blade when the handle is released, note that if the cable is broken it will cause the brake to not release even when the lever is pressed. Keep in mind this high-quality rubber insulated part is sold individually.

This is an authentic manufacturer-sourced part which is made for use with Murray, Snapper and simplicity lawnmowers and snowblowers. It is an important component of the variable speed function. If the part is missing or is damaged, it will provide an identical replacement for the original driven disc that was installed on a new unit. Note...Read more, this high-quality part is made of durable metal with rubber and is sold as an individual component. Refer to the appropriate diagrams and the owner's manual for your model to ensure the correct repair procedure. A wrench set will be needed to replace this driven disc.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Designed for use with lawn and garden equipment, this manufacturer-approved component is an identical replacement for an idler in a variety of models. This part is not part of a kit or assembly. It is sold individually. The idler is made of metal, is white in color, roughly 2.75 inches in diameter, and is used to drive the unit as well as...Read more support the belt. This part needs to be replaced when it is worn or damaged, which will occur through regular use. When the part is malfunctioning, you will lose drive control in your machine. This part is located usually located on the idler arm. Please refer to your owner's manual for the exact location on your model. You will need a wrench set or socket set to complete this repair. Customers rated this repair as medium difficulty.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.