7080475 Snapper Lawn Mower - Overview

The Chute Plug is a plastic, black, individually sold part which covers the grass bag chute and is rated as "Easy" to install. This is an OEM part and if broken, it should be replaced. Refer to your make, model and diagram to ensure you've chosen the correct part.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is specially designed for Snapper lawn mowers. It is an identical replacement for a missing or damaged deck cover that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind it ...Read moreis a high-quality component which is made of durable black plastic and is sold individually.

Elevate the functionality of your lawn mower with this 8 x 2.00 gray plastic wheel from the reputable brand, Snapper. Designed for optimal performance, this wheel ensures smooth movement and maneuverability of your lawn mowing equipment, easing your gardening tasks. Complete your repair process easily, by wearing work gloves that offer se...Read morecurity for your hands while installing the wheel. Its sturdy structure ensures durability, reinforcing your lawn mowing equipment for lengthy service. Choose this Snapper wheel for a reliable, high-quality supplement to your lawncare tool collection.

This is an authentic manufacturer-sourced component from Snapper. The clutch spring is designed to give enough pressure to the clutch, returning it to original position. This item is fitted onto the clutch idler arm and clutch control cable in the drive system. A screwdriver and a pair of pliers are helpful in making the repair. The metal clutch spring is sold individually.

This ball joint is an authentic OEM component designed for use in lawnmowers and lawn tractors. It is found near the transmission assembly and is responsible for securing the drive system transfer link to the transmission assembly. Over time, the ball joint may experience wear and tear due to continuous use, exposure to dirt and debris, o...Read morer lack of lubrication. The drive system transfer link may disconnect from the transmission assembly, resulting in a loss of power transmission. As a result, the lawnmower may not move forward or backward when the engine is running. Remove the nut on the transfer link and the fasteners on the inside of the hex shaft shield. Carefully detach the ball joint. Secure the new ball joint to the transfer link and hex shaft shield to complete the repair.

It is an authentic part which is supplied directly from the original equipment manufacturer for use with Snapper lawn mowers. This is the handle that the clutch cable attaches to. It is made of durable metal and is sold individually. Note, the grip for the handle is sold separately. Make sure to check the appropriate diagrams of your mode...Read morel for the correct installation procedure. To perform this repair a screwdriver will be needed.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

An authentic item that is supplied directly from the original equipment manufacturer. This replacement side chute is a high-quality item designed for use with Snapper and Simplicity lawn mowers. It is mounted to the side of the mower deck for the cut grass to be expelled out of. This part is made of durable plastic and it is sold individually, please note the hardware to secure it is sold separately.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This is an authentic OEM component from Snapper. The clutch pull cable is made for use with the Steel Deck Series lawn mowers. The clutch is composed of metal and wiring encased in durable plastic. Fastened from the clutch handle to the clutch spring, this component allows the operator to manage the mower speed. A pair of pliers are often...Read more necessary for the otherwise simple repair. The clutch pull cable is sold individually.