7080054 Snapper Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

The Chute Plug is a plastic, black, individually sold part which covers the grass bag chute and is rated as "Easy" to install. This is an OEM part and if broken, it should be replaced. Refer to your make, model and diagram to ensure you've chosen the correct part.

This is a genuine Snapper part. The axle bushing is constructed of high-quality metal, and is compatible with many lawn mower devices. This part helps to reinforce the front and rear wheel rims. Keep in mind this item is sold individually. A wrench and a screwdriver are needed in the removal and replacement.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is specially designed for Snapper lawn mowers. It is an identical replacement for a missing or damaged deck cover that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind it ...Read moreis a high-quality component which is made of durable black plastic and is sold individually.

This is an authentic manufacturer-sourced component from Snapper. The clutch spring is designed to give enough pressure to the clutch, returning it to original position. This item is fitted onto the clutch idler arm and clutch control cable in the drive system. A screwdriver and a pair of pliers are helpful in making the repair. The metal clutch spring is sold individually.

It is an authentic part which is supplied directly from the original equipment manufacturer for use with Snapper lawn mowers. This is the handle that the clutch cable attaches to. It is made of durable metal and is sold individually. Note, the grip for the handle is sold separately. Make sure to check the appropriate diagrams of your mode...Read morel for the correct installation procedure. To perform this repair a screwdriver will be needed.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

An authentic item that is supplied directly from the original equipment manufacturer. This replacement side chute is a high-quality item designed for use with Snapper and Simplicity lawn mowers. It is mounted to the side of the mower deck for the cut grass to be expelled out of. This part is made of durable plastic and it is sold individually, please note the hardware to secure it is sold separately.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper lawn mowers. This special axle is utilized to secure the rear foot guard. If the component is missing or damaged, this part will provide an identical replacement for the original item that was installed on a new unit. Note, it is made of dura...Read moreble metal and is sold individually. A wrench set will be needed to perform this repair. Check the diagrams for your model to ensure the correct replacement procedure.