7060937 Snapper Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.

Lockwasher split 3/8

This is a genuine replacement part sourced directly from the manufacturer. The straight lube fitting is commonly found in riding mowers and snowblowers from Snapper and Murray. This part is made of metal, and is generally placed in the hub of the wheel assembly to allow the axle to be lubricated. This item is sold as an individual replacement part.

Fw .438x1x.084 yz