70021CH1 Husqvarna Lawn Mower - Overview

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

This is a genuine OEM sourced replacement part used on lawn mowers. This is the front wheel that helps to move your mower around. This wheel is made out plastic and it is sold individually. To replace this wheel you would need a wrench. • Remove the hub cap and the locknut • Replace the old wheel with the new one • Secure it with a nut and a hub cap

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman Lawn Mowers. The blade adapter attaches the mower blade to the motor shaft. The most common reason for replacing the blade adapter is if it is worn or damaged. This part is sold individually. The tools you will need for replacing the blade adapter are 5/8" socket, hammer, torque wrench.

This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special v-belt is commonly used to link the motor pulley and the transmission's drive pulley. This v-belt is available as an individual replacement part, please see model diagram for associative parts.

This authentic manufacturer-supplied part is specially designed for use with walk-behind lawn mowers. It is a special hardware that helps to secure the wheel height adjustment spring and the rear axle arm assembly together. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to...Read more refer to the appropriate diagrams for your model to for the exact location and the correct application. One durable shoulder bolt is included.