697 Nutone Bath & Ventilation Fan - Overview

This replacement blower wheel is specially manufactured for Broan and Nutone ceiling fans/heaters. This wheel is also known as squirrel cage fits inside the housing on the motor shaft. As it rotates it will produce an airflow. Over time it may warp rotating irregularly which can result in unwanted noise and/or poor performance. This wheel...Read more is made out of plastic and it is sold individually. Please note the hardware to secure it to the motor is sold separately. Repair is fairly easy, requiring only a screwdriver. • Unplug the unit first • Remove the cover • Separate the blower wheel from the shaft • Secure the new wheel on the motor shaft • Reassemble and test

This is a grille and spring assembly for various models of room and ceiling vents. The grille and spring assembly are responsible for allowing air to flow freely into the room from the fan, prevent dirt and debris from entering the vent, and hold the grille in place without vibrating. This assembly comes individually and does not come wit...Read moreh any other hardware or parts, so consider that before placing an order. If your current vent grille(s) are cracked, not sitting flush with your wall, or are yellowing and discolored, you need to replace it/them. Replacing this assembly only requires you to pull off and disconnect the old assembly, and then install the new one by squeezing the springs into place and pushing the grille onto the vent.