6796FDZ Makita Screwdriver - Overview

This is a Genuine OEM replacement part used on Makita drills and drivers. This is a metal spring and it is sold individually. Over time springs may lose its tension and may not function as intended. If this part is lost or damaged it must be replaced. To replace this spring a pair of pliers is needed.

This is an authentic replacement part manufactured for use with Makita drills/drivers. The flat washer is commonly used to provide a wider surface area for the pressure put on the spring ring by the compression spring on the spindle. This flat washer is available as an individual replacement part, please see model diagram for associative parts.

The ring spring goes next to the flat washer and is made of metal. It is priced as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with Makita drills, impact drivers, and screwdrivers. A set of pliers may be necessary during the installation of this part. It may become broken and will need to be replaced.

Genuine Makita replacement part rnSet of 2 Carbon Brushes with wire lead and brush spring attached.rnrn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced ...Read more power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

It is a genuine OEM supplied replacement flat washer which has a few different applications depending on the tool, make sure to check appropriate diagrams for correct location and use of this hardware. Please note this part is made from high quality metal and it is sold individually.

This is an authentic Makita replacement part that is sourced from the original manufacturer for use with grinders, impact drivers, die grinders, chainsaws, and impact wrenches. The tapping screw is used with several different types of tools and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.

This authentic manufacturer-sourced part is specially designed for use with Makita power tools. The purpose of the brush cap is to secure the brush in the unit. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. Please make sure to refer to t...Read morehe appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable plastic and is sold individually.

It is a genuine manufacturer sourced replacement part that is designed for use with Makita power tools. This o-ring provides an air-tight seal between connected pieces, please make sure to refer to appropriate diagrams of your model for the correct location and use of this hardware. Over time the material tends to deteriorate and may crac...Read morek eventually requiring a replacement. It is a high-quality item that is made of durable rubber and it is sold individually.