672R Nutone Bath & Ventilation Fan - Overview

This is an authentic manufacturer sourced replacement part designed for Nutone exhaust fans. This assembly includes a motor, plastic impeller wheel and a metal housing/bracket. When replacing this assembly you would need a screwdriver • First you would need to remove the plastic cover/grille • Unplug the power unit • Unscrew the o...Read moreld assembly and slide it out • Place power/blower unit into housing so that mounting plate's tabs insert into slots in housing • Secure mounting bracket with screws • Connect the power unit and attach cover/grille

This is a grille and spring assembly for various models of room and ceiling vents. The grille and spring assembly are responsible for allowing air to flow freely into the room from the fan, prevent dirt and debris from entering the vent, and hold the grille in place without vibrating. This assembly comes individually and does not come wit...Read moreh any other hardware or parts, so consider that before placing an order. If your current vent grille(s) are cracked, not sitting flush with your wall, or are yellowing and discolored, you need to replace it/them. Replacing this assembly only requires you to pull off and disconnect the old assembly, and then install the new one by squeezing the springs into place and pushing the grille onto the vent.

This is an authentic Nutone replacement part, sold individually. Includes wheel and clip. The Blower Wheel is the part that rotates inside the fan housing, producing airflow. It is compatible with the fan models listed below. Repair is fairly easy, requiring only a screwdriver.

This item is available as an individual replacement part. The motor mount is made of rubber and attaches to the bracket. A screwdriver and a set of pliers might be helpful during the installation of this item. It may become broken and will need to be replaced. This is a Broan and Nutone replacement part directly sourced from the manufacturer and used in exhaust fans.