665RP Nutone Heater - Overview

This replacement blower wheel is specially manufactured for Broan and Nutone ceiling fans/heaters. This wheel is also known as squirrel cage fits inside the housing on the motor shaft. As it rotates it will produce an airflow. Over time it may warp rotating irregularly which can result in unwanted noise and/or poor performance. This wheel...Read more is made out of plastic and it is sold individually. Please note the hardware to secure it to the motor is sold separately. Repair is fairly easy, requiring only a screwdriver. • Unplug the unit first • Remove the cover • Separate the blower wheel from the shaft • Secure the new wheel on the motor shaft • Reassemble and test

This is a Genuine OEM replacement part used on some Nutone Ceiling Heaters/Exhaust Fans. This Plastic part is Off-White Color and it includes the Grille and the Lens Part Number: S53740000. This grille does not attach to the unit with springs it is held in place by the reflector studs. No tools required for installation this part simply snap in place.

Poor heat or weak airflow can result from a worn motor, damaged blower wheel, failed element, or heavy dust inside a ceiling heater. A complete heater assembly replaces these main parts as one unit. First inspect the control switch, thermal safety device, wiring, and vent opening. Match the assembly and plug to the full appliance model. T...Read moreurn off power at the breaker, confirm the circuit is dead, and wait for all parts to cool. Secure every screw, keep wires away from the heating element and fan, then reinstall the grille before restoring power.

This heater element assembly generates controlled heat required for proper appliance operation. Designed for consistent performance, it is commonly replaced when heating becomes weak, uneven, or fails altogether.

This is a genuine Broan replacement part used on Ceiling Heaters/Exhaust Fans. It is sold individually and is made out of White Plastic. Light lens can be easily installed with snap in action, no additional tools required.

This is a genuine NuTone replacement part that has been OEM sourced to ensure a high-level of quality. The vent assembly is intended to be used with ceiling heaters and exhaust fans. The vent includes the fan, motor, bracket, and it is sold pre-assembled. This part is priced as a single item.

This is an authentic OEM sourced replacement electric motor designed for Nutone ceiling heaters and exhaust fans. It is the main unit that drives the fan. Please note, this item is sold individually. When replacing this motor assembly you will need a screwdriver. • First you would need to remove the plastic cover/grille • Unplug the...Read more power unit • Remove the old motor assembly • Secure the new assembly in place • Connect the power unit and secure the cover