665RF Nutone Heater - Overview

This replacement blower wheel is specially manufactured for Broan and Nutone ceiling fans/heaters. This wheel is also known as squirrel cage fits inside the housing on the motor shaft. As it rotates it will produce an airflow. Over time it may warp rotating irregularly which can result in unwanted noise and/or poor performance. This wheel...Read more is made out of plastic and it is sold individually. Please note the hardware to secure it to the motor is sold separately. Repair is fairly easy, requiring only a screwdriver. • Unplug the unit first • Remove the cover • Separate the blower wheel from the shaft • Secure the new wheel on the motor shaft • Reassemble and test

This is a Genuine OEM replacement part used on some Nutone Ceiling Heaters/Exhaust Fans. This Plastic part is Off-White Color and it includes the Grille and the Lens Part Number: S53740000. This grille does not attach to the unit with springs it is held in place by the reflector studs. No tools required for installation this part simply snap in place.

This genuine OEM heater assembly includes a scroll cover, scroll housing, motor, wheel, bolt assembly, element, hook (5), nut (6), screw (5), and a two-prong plug. It is sourced from the original manufacturer for use in ceiling heaters. If the equipment can no longer produce heat or switch on, the assembly should be replaced. Ensure that ...Read morethe power to the unit is turned off at the circuit breaker to prevent accidental shock. Remove the vent cover/grille to access the assembly. Unplug the heater assembly and remove the mounting screw(s) that hold it in place. Pull the faulty assembly out of the housing and place the new one in. Reinstall the mounting screw(s) and plug the assembly in. Reattach the cover/grill to complete the repair.

This is a genuine Broan replacement part used on Ceiling Heaters/Exhaust Fans. It is sold individually and is made out of White Plastic. Light lens can be easily installed with snap in action, no additional tools required.

This is a genuine NuTone replacement part that has been OEM sourced to ensure a high-level of quality. The vent assembly is intended to be used with ceiling heaters and exhaust fans. The vent includes the fan, motor, bracket, and it is sold pre-assembled. This part is priced as a single item.

This is an authentic OEM sourced replacement electric motor designed for Nutone ceiling heaters and exhaust fans. It is the main unit that drives the fan. Please note, this item is sold individually. When replacing this motor assembly you will need a screwdriver. • First you would need to remove the plastic cover/grille • Unplug the...Read more power unit • Remove the old motor assembly • Secure the new assembly in place • Connect the power unit and secure the cover

This heater element assembly generates controlled heat required for proper appliance operation. Designed for consistent performance, it is commonly replaced when heating becomes weak, uneven, or fails altogether.

This is a genuine replacement part sourced from the original manufacturer for use with ceiling ventilation fans. The special bolt assembly is commonly used to mount the blower wheel bracket. The bolt assembly is available as an individual replacement part, please see model diagram for associative parts.

The motor heater is an OEM part direct from NuTone. The metal, wiring and plastic component is made for use with several ceiling fans. This component is fastened between the fan blower wheel and the fan motor plate assembly. For the repair, you may need a screwdriver, wrench and pliers. The motor heater is sold individually.