This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to mak...Read moree sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken wheel unit on the bottom dish rack
100 of 115 peoplefound this instruction helpful.
Thomas from WEST OLIVE, MI
Very Easy
Less than 15 mins
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix.
Was this helpful?
Thank you for voting!
Wheel on lower shelf broke off
31 of 37 peoplefound this instruction helpful.
Dennis from OAKWOOD, IL
Very Easy
Less than 15 mins
Simply snap the old one off and snap the new one on. Simple as that less than 15 seconds.
Was this helpful?
Thank you for voting!
All of the wheels had broken off and the bottom rack was hard to move.
21 of 26 peoplefound this instruction helpful.
Cheryl from VANCOUVER, WA
Very Easy
Less than 15 mins
Screw drivers
It was very easy to pry off the old wheel assemblies with a screwdriver and pop the new ones in place. Although the part is called "wheel" it is actually the plastic piece containing two wheels. I thought it was a little confusing to just call it "wheel" as each piece has two wheels. It was an easy repair.