6651350590 Kenmore Trash Compactor Parts & Repair Help | PartSelect
Models > 6651350590

6651350590 Kenmore Trash Compactor - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(36)
PartSelect #:PS398589
Manufacturer #:882699
This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your com...
$45.53
In Stock
(1)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$4.18
In Stock
(1)
PartSelect #:PS11747965
Manufacturer #:WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a ru...
$6.08
In Stock
(8)
PartSelect #:PS1782408
Manufacturer #:13030RP
This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place th...
$15.47
In Stock
(12)
PartSelect #:PS11744742
Manufacturer #:WP777811
The function of the directional switch on your trash compactor is to ensure the ram lowers to compress your trash, then returns to the top position. If your trash compactor does no...
$44.76
In Stock
(3)
PartSelect #:PS11744741
Manufacturer #:WP777533
This part is a power nut, and it is intended to be used in conjunction with trash compactors. The function of this nut is to fasten to the side of the ram where it is threaded. Whe...
$30.60
In Stock
(10)
PartSelect #:PS382679
Manufacturer #:675382
The rotary switch kit is also known as the start switch or the on and off switch, and is used to power on your trash compactor. The function of the rotary switch kit is to control ...
$95.99
In Stock
PartSelect #:PS385132
Manufacturer #:72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...
$7.04
In Stock
(7)
PartSelect #:PS398581
Manufacturer #:882657
This replacement part is a foot pedal which fits on a trash compactor. It includes two screws for installation. The pedal mounts on the footplate on the bottom front of the contain...
$39.76
In Stock
(5)
PartSelect #:PS11747573
Manufacturer #:WP9871602
This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjun...
$10.04
In Stock
Questions and Answers for 6651350590
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Trash Compactor ram wouldn't lower

Directional Switch – Part Number: WP777811
  • Customer: Scott from Indianapolis, IN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 32 of 37 people found this instruction helpful
I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical directional\limit s... read more

Change out defective switch

  • Customer: Edward from Deerfield Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 34 of 46 people found this instruction helpful
Pulled out compactor drawer and removed same, slid the compactor cabinet out and unpluged the appliance. Removed the two phillips head screws to release the control panel. lossened the locking nut from switch. matched the switches to be sure parts were the same,switched the wires to the new switch and reinstalled.replaced phillips screws, all Done !!! read more

Compactor motor kept running after cycle ran, making alot of noise and unit jumping around.

Directional Switch – Part Number: WP777811
  • Customer: Keith from Keller, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 25 of 29 people found this instruction helpful
Pulled the Compactor from underneath cabinet, unplugged power. Removed the top plate off compactor to expose the crush piston. Removed the front control panel by removing two phillips screws, wiring and directional (limit) switch is now exposed. Removed the two screws securing switch, removed wiring one wire at a time and replaced on new switch in same posit... read more