660RP Nutone Heater - Overview

This is a Genuine OEM replacement part used on some Nutone Ceiling Heaters/Exhaust Fans. This Plastic part is Off-White Color and it includes the Grille and the Lens Part Number: S53740000. This grille does not attach to the unit with springs it is held in place by the reflector studs. No tools required for installation this part simply snap in place.

Poor heat or weak airflow can result from a worn motor, damaged blower wheel, failed element, or heavy dust inside a ceiling heater. A complete heater assembly replaces these main parts as one unit. First inspect the control switch, thermal safety device, wiring, and vent opening. Match the assembly and plug to the full appliance model. T...Read moreurn off power at the breaker, confirm the circuit is dead, and wait for all parts to cool. Secure every screw, keep wires away from the heating element and fan, then reinstall the grille before restoring power.

This heater element assembly generates controlled heat required for proper appliance operation. Designed for consistent performance, it is commonly replaced when heating becomes weak, uneven, or fails altogether.

This is a genuine Broan replacement part used on Ceiling Heaters/Exhaust Fans. It is sold individually and is made out of White Plastic. Light lens can be easily installed with snap in action, no additional tools required.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Nutone ceiling heaters. It is an identical replacement for a missing or damaged scroll that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable component is sold individually.

This 120-volt motor turns the blower wheel in select ceiling heater and bath fan units. It moves air across the heating element and into the room. Replace it if the motor is noisy, weak, seized, or will not run. Use the complete heater or fan model number to guarantee the proper fit. Turn off power at the circuit breaker and let the heate...Read morer cool before repair. Remove dust and lint from the housing, then make sure the blower wheel spins freely after installation.

This is a genuine replacement part sourced from the original manufacturer for use with ceiling ventilation fans. The special bolt assembly is commonly used to mount the blower wheel bracket. The bolt assembly is available as an individual replacement part, please see model diagram for associative parts.