654J Troy-Bilt Tiller - Overview

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

The tine shaft oil seal is used in tillers and is made of metal and rubber. This part is priced as an individual item, but may require two for proper installation. If the seal becomes dried out or cracked it will need to be replaced. It presses onto the sides of the transmission housing and stops oil from leaking, and may require a screwdriver during replacement. This part is an OEM from Troy-Bilt.

This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation. This part reduces friction on a moving part, inside of a stationary par...Read moret. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).

This is an original replacement part sourced directly from the manufacturer. The flat washer is commonly found in tillers from Troy-Bilt, Yard Machine, and MTD. This part is generally used to help secure the drive shaft assembly in the transmission suspension housing. Please be aware that there are different washers used in the machine...Read more. Refer to the parts diagram to be sure of ordering the correct part. You may require a wrench and pliers when replacing this item. The flat washer is sold as an individual replacement part.

This is an original replacement part sourced directly from the manufacturer. The flat washer is commonly found in tillers from Troy-Bilt. This part is made of metal, and is generally used to reduce play for the bronze bushing in the shaft housing. Please be aware that there are different washers used in the machine. Refer to the parts...Read more diagram to be sure of ordering the correct part. You may require pliers when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.