6509 (SER 808D) Milwaukee Reciprocating Saw - Overview

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the mos...Read moret commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Milwaukee replacement part and is sold individually. Its purpose along with the 06-75-2402 Blade Clamp Screw, is to clamp the blade to the reciprocating spindle of the Milwaukee Sawzall model numbers shown below. If the blade clamp is being replaced, it advisable to replace the blade clamp screw at the same time as they are both wear parts.

This is a Genuine OEM replacement part designed for Milwaukee Sawzall. It is made out of Plastic and it is Sold Individually. This part is the Insulator for the Gear Case. To replace this item you would need a Torx Screwdriver. • First you want to ensure the tool is Not plugged in • Remove the screws that secure the Gear Case • Re...Read moremove the old insulator and replace it with the new one • Reassemble using the same screws

Genuine Milwaukee replacement part, it is sold individually. The 45-16-0495 Pivot Shoe Assembly is used to be pressed up against the material that the Sawzall is cutting. It aids in cutting a straight and accurate line. It will pivot so the saw can be used at different angles.

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

This authentic OEM sourced part is specially made for use with Milwaukee saws. It is the special seal for the spindle bearing, it allows the beating to rotate freely while ensuring a tight fit. The part provides an identical replacement for a missing or a worn component that was installed on a new unit. Keep in mind this high-quality seal...Read more is made of durable felt material and is sold individually. Note, the seal retainer is sold separately.

This is a genuine OEM replacement part. This steel bearing is used in a variety of Milwaukee handheld power tools including rotary hammers and Sawzalls. Ball bearings serve to separate and buffer moving parts. They also assist with directional stability. They are therefore a high-wear part that is replaced regularly. This item is sold individually. Retaining rings and spacers sold separately.

This is an authentic manufacturer sourced replacement brush holder assembly that is utilized on Milwaukee power tools. This part is designed to secure two carbon brushes around the armature to provide stable and safe contact. Please note carbon brushes are sold separately. One durable plastic brush holder assembly is included per order.