6508 - Overview

This is a genuine Milwaukee replacement part and is sold individually. Its purpose along with the 06-75-2402 Blade Clamp Screw, is to clamp the blade to the reciprocating spindle of the Milwaukee Sawzall model numbers shown below. If the blade clamp is being replaced, it advisable to replace the blade clamp screw at the same time as they are both wear parts.

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is a genuine OEM sourced replacement part which is specially designed for use with Milwaukee power tools. It is a standard hardware which has multiple uses based on the model of your tool, please make sure to check the appropriate diagrams for the correct location and application of this component. This screw is made of high-quality ...Read moremetal and is sold individually, you will need a flat-head or a Torx screwdriver to secure or remove it.

This is a Genuine OEM replacement part designed for Milwaukee Sawzall. It is made out of Plastic and it is Sold Individually. This part is the Insulator for the Gear Case. To replace this item you would need a Torx Screwdriver. • First you want to ensure the tool is Not plugged in • Remove the screws that secure the Gear Case • Re...Read moremove the old insulator and replace it with the new one • Reassemble using the same screws

Genuine Milwaukee replacement part, it is sold individually. The 45-16-0495 Pivot Shoe Assembly is used to be pressed up against the material that the Sawzall is cutting. It aids in cutting a straight and accurate line. It will pivot so the saw can be used at different angles.

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.