6507TYPEB Milwaukee Reciprocating Saw - Overview

This is a genuine Milwaukee replacement part and is sold individually. Its purpose along with the 06-75-2402 Blade Clamp Screw, is to clamp the blade to the reciprocating spindle of the Milwaukee Sawzall model numbers shown below. If the blade clamp is being replaced, it advisable to replace the blade clamp screw at the same time as they are both wear parts.

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Genuine Milwaukee replacement part, it is sold individually. The 45-16-0495 Pivot Shoe Assembly is used to be pressed up against the material that the Sawzall is cutting. It aids in cutting a straight and accurate line. It will pivot so the saw can be used at different angles.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

This is a genuine OEM replacement part. This steel bearing is used in a variety of Milwaukee handheld power tools including rotary hammers and Sawzalls. Ball bearings serve to separate and buffer moving parts. They also assist with directional stability. They are therefore a high-wear part that is replaced regularly. This item is sold individually. Retaining rings and spacers sold separately.

Included in part number 30-72-0060