EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

62946969 Kenmore Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grease Filter – Part Number: WP71002111
$25.75
In Stock
Grease Filter
★★★★★
★★★★★
(56)
Part #WP71002111
This filter is made of metal and is intended for use with ranges and cooktops. Grease filters are an important but often neglected part of ranges. If the filter is full, your extractor fan will become noisier, and cause a bad odor to come from your range. Neglecting the grease filter can also pose a fire hazard in your kitchen. Regular maintenance and cleaning of the grease filter is important and will make the part work more efficiently and last longer. It takes about 30 seconds to replace your grease filter. While replacing the filter, take a minute to check for a grease buildup underneath, and clean out any drip-through grease. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same.
Screw – Part Number: W11233072
$21.45
In Stock
Screw
★★★★★
★★★★★
(6)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Surface Burner Switch - 240V – Part Number: W11120791
$78.26
In Stock
Surface Burner Switch - 240V
★★★★★
★★★★★
(14)
Part #W11120791
This surface burner switch, also known as an infinite switch, controls and regulates the heat output of the burners on a stovetop. The user simply adjusts the knob on the user interface panel, which in turn controls this switch. Made for various ranges, wall ovens and cooktops, this is a genuine OEM part that comes by itself, without any hardware like screws or nuts. This burner switch is an electrical component that you also handle directly, so it can become faulty leading to problems like your stovetop not heating enough, overheating or staying at a fixed heat. This burner switch is a vital component for your stovetop and if it presents any of those issues, it needs to be replaced immediately. A screwdriver, set of pliers and wiring diagram will be needed for the replacement and installation process, and you will need to remove your appliance from the wall outlet first. Remove the knobs from the control panel and then gain access to the underneath portion of it with your screwdriver and disconnect the switch. Remove the wires from the burner switch with a set of pliers and disconnect the securing screws holding the switch in place. Now, you can install the new switch and reassemble the panel, being mindful of wiring each connector to the appropriate wire.
Range Screw – Part Number: WP179051
$7.47
Special Order
Range Screw
★★★★★
★★★★★
(5)
Part #WP179051
Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.
2 Piece Broiler Pan – Part Number: 4396923
$49.50
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(6)
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
Rock Grate Support – Part Number: 700819
$49.50
Special Order
Rock Grate Support
Part #700819
Sold individually.
Rock Plate – Part Number: 74011338
No Longer Available
Rock Plate
★★★★★
★★★★★
(1)
Part #74011338
This part is used as a support for the grill element. Sold individually.
Clock Knob - black – Part Number: WP7711P492-60
$17.15
Special Order
Clock Knob - black
Part #WP7711P492-60
The clock knob attaches to the center of the oven control panel and is used to adjust the built-in clock. This clock knob is less than an inch in diameter. It is all black in color and is made of plastic. This knob will accept a D-shaped shaft. It is worth noting that the clock knob does not work in place of the temperature knob, as they are designed differently. Many of our customers described this repair as easy. To complete the repair, simply pull off the damaged knob and replace it with the new one.
Range Screw – Part Number: WPY706189
$7.47
In Stock
Broil Element – Part Number: WPY04100514
$82.11
In Stock
Broil Element
★★★★★
★★★★★
(4)
Part #WPY04100514
Upgrade the performance of your oven with this broil element from Whirlpool. It's a genuine OEM part designed specifically to fit a variety of Whirlpool oven models. Expertly crafted, this broil element is located at the top of the oven to provide efficient heat for broiling. Please remember to disconnect electrical power to the range before starting your installation process for safety precaution. Wear gloves while handling this part to protect your hands. Enjoy delectable roasts and gratins with this Whirlpool broil element.
Interior Window Assembly – Part Number: WP5700M600-60
No Longer Available
Interior Window Assembly
★★★★★
★★★★★
(1)
Part #WP5700M600-60
This part includes 2 panes of glass enclosed in a metal frame. It's the innermost window for your oven door.

Common Symptoms of the 62946969

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replace Grease Filter
531 of 547 people found this instruction helpful.
  • Gene from Washington C.H., OH
  • Really Easy
  • Less than 15 mins
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.
Was this helpful?
Thank you for voting!
Burner had one temperature--hot, regardless of setting
110 of 131 people found this instruction helpful.
  • James H from Oxford, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
1. Killed power and removed the regulator's knob, noted the position of the old control.
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the housing enough to get at the old switch and carefully pulled it loose--it was a front burner so the control switch was about as far back as it could be but still wasn't that hard to get at.
4. Turned the new switch to orient the wire connectors, then, using a needle-nose pliers, removed each friction connector, one at a time, and fitted them on the new switch (note: one of the wires fitted best if it went under as opposed to around the base of the new switch).
5. Replaced the control back through the housing and screwed it in place, making sure the orientation of the control matched the way it looked originally.
6. Slide the housing back over the two screws and tightened, replace vent.
7. Replaced the knob and turned on the power.

(The above took me about twice as long to write as it did to make the repair and I write professionally but am not a professional electrician.)

Also, I bought a second control switch because, given the age of the unit, I'm sure another one will go. The second one will assure that it won't happen :-).
Was this helpful?
Thank you for voting!
Needed to replace filter
99 of 165 people found this instruction helpful.
  • Marie from New Smyrna Bch, FL
  • Really Easy
  • Less than 15 mins
Just placed it at the filter location. Liked the ring feature on the filter for ease of removal for cleaning. My previous ones didn't have such feature. Thank you for filling my order. I bought an extra filter for the future. I'm a big user of my Jenn-Air range. I may soon be needing to replace my griddle. Will be contacting your co mpany then.
Was this helpful?
Thank you for voting!