EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

62349 (CBKESEA) LG Microwave - Overview

Diagrams for 62349

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Micro Switch – Part Number: 6600W1K001C
$25.78
In Stock
Microwave Micro Switch
★★★★★
★★★★★
(4)
Part #6600W1K001C
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or closed. If your microwave does not provide heat, or will not start properly, you may need to replace the micro-switch. This part is approximately 1 inch in length and 3/4-inch in width. It is made of black plastic with two metal prongs. This is an OEM part sourced directly from the manufacturer. This part is sold individually. Be sure to disconnect the microwave from the power source before you begin this repair.
Micro Switch – Part Number: 6600W1K001D
$25.78
In Stock
Micro Switch
★★★★★
★★★★★
(27)
Part #6600W1K001D
This microwave door interlock switch responds to the door latch, helping prevent cooking operation while the door is open. Its small actuator changes the electrical contact when the door opens or closes. A worn or damaged switch may prevent the microwave from starting even when the door is fully shut. Replacing a faulty switch helps restore proper door detection within the safety interlock system. Internal microwave components can retain a dangerous electrical charge after unplugging, so disconnecting power alone does not make them safe to handle. This is an OEM part sourced directly from the manufacturer.
Time Delay Fuse – Part Number: 3B74133Q
$11.77
In Stock
Time Delay Fuse
★★★★★
★★★★★
(3)
Part #3B74133Q
Electrical overload protection comes from this microwave time delay fuse, rated at 20 amps and 250 volts. It tolerates brief startup current while opening the circuit during a sustained overload or short circuit. A blown main fuse may leave the microwave without power or prevent it from starting. The fuse cannot be reset and requires replacement once it opens. Internal microwave components can retain a dangerous electrical charge after unplugging, so disconnecting the power cord alone does not make internal handling safe. This is an OEM part sourced directly from the manufacturer.
Turntable Assembly – Part Number: 5889W1A003B
No Longer Available
Turntable Assembly
★★★★★
★★★★★
(19)
Part #5889W1A003B
The turntable support assembly is also known as a roller guide and fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assembly has 3 arms and each is approximately 4 inches long. If your cooking tray will not turn, check the support assembly for signs of damage. If no damage can be seen, check the coupler for damage.
Motor Synchronous – Part Number: 6549W1S011B
$44.23
In Stock
Motor Synchronous
★★★★★
★★★★★
(20)
Part #6549W1S011B
This AC synchronous motor is a genuine OEM replacement part specially made for microwaves. It operates on an alternating current, and it is responsible for rotating the turntable to ensure even heating of your food. The motor can fail due to physical damage or malfunctioning internal components such as the bearings. If your turntable is not rotating, you will need to replace the motor. You can find it underneath the microwave cavity, near the center. Disconnect the microwave from the power source and remove the cover. Turn the microwave over and remove the bottom panel to access the motor. Disconnect the motor from its mounting location, and then insert the new motor in its place. Ensure the new motor is securely attached before reassembling the appliance.
Glass Cooking Tray – Part Number: 3390W1A012G
No Longer Available
Glass Cooking Tray
Part #3390W1A012G
Magnetron – Part Number: 6324W1A001L
$130.68
In Stock
Magnetron
★★★★★
★★★★★
(8)
Part #6324W1A001L
Microwave energy for heating food is generated by this magnetron, which converts electrical power from the high voltage circuit into cooking energy. A failed magnetron may leave the appliance running without heating, even while the turntable, display, and fan continue to operate. Replacing a faulty unit helps restore the energy needed to warm and cook food. Internal microwave components can retain a dangerous electrical charge after the appliance is unplugged, so disconnecting power alone does not make the internal circuitry safe to handle. This is an OEM part sourced directly from the manufacturer.
Microwave Screwtapping – Part Number: 1TTL0402818
$16.45
On Order
High Voltage Diode – Part Number: 6021W3B001V
$17.15
In Stock
High Voltage Diode
★★★★★
★★★★★
(2)
Part #6021W3B001V
This microwave high voltage diode and cable assembly allows current to flow in one direction, working with the transformer and capacitor to supply power to the magnetron. That power enables the magnetron to generate the microwave energy used for heating food. A failed diode may leave the appliance running without producing heat. Replacing a faulty assembly helps restore normal heating circuit operation. Internal microwave components can retain a dangerous electrical charge after unplugging, so disconnecting power alone does not make the circuitry safe to handle. This is an OEM part sourced directly from the manufacturer.
Lamp,Incandescent – Part Number: 6912W3B002L
$25.78
In Stock
Capacitor – Part Number: 0CZZW1H004C
$43.18
In Stock
Capacitor
Part #0CZZW1H004C
Electrical energy stored and released by this microwave high voltage capacitor helps power the magnetron that heats food. It works with the transformer and diode as part of the high voltage circuit. A failed capacitor may prevent heating or cause unusual humming during operation. Replacing a faulty capacitor helps restore the electrical operation needed for microwave heating. This component can retain a dangerous electrical charge even after the appliance is unplugged, so disconnecting power alone does not make it safe to touch or handle. This is an OEM part sourced directly from the manufacturer.
Cover,Resin – Part Number: 3052W2A021A
No Longer Available
Cover,Resin
Part #3052W2A021A

Exact Part matches for your search term

Spacer – Part Number: 62349
No Longer Available
Spacer
This part number matches the current model number 62349
Part #62349
Lamp Holder – Part Number: DE81-04007A
No Longer Available
Lamp Holder
This part number matches the current model number 62349
Part #DE81-04007A
NLATUBE – Part Number: 62349
No Longer Available
NLATUBE
This part number matches the current model number 62349
Part #62349

Common Symptoms of the 62349

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not rotate or heat up food.
52 of 77 people found this instruction helpful.
  • Joshua from WHITE LAKE, MI
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Was this helpful?
Thank you for voting!
Motor Burned Out On Turntable
37 of 49 people found this instruction helpful.
  • Steven from Oak Forest, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri p to home depot today.
Was this helpful?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Was this helpful?
Thank you for voting!