621451X31B Murray Snow Blower - Overview

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is an OEM replacement part for Briggs and Stratton, Murray, Snapper, and Simplicity engines. When engaged the ignition key starts the lawn tractor. This part is made of metal and is sold in a set of two. There are no tools needs to use this part, as it comes pre-assembled and really to use.

This authentic replacement part is designed for use with Murray, Simplicity and Snapper snowblowers. Flange bearings are used to provide support for a shaft while reducing friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Beari...Read morengs experience constant wear from pressure, heat, vibration, and friction. Because of this, many bearings need to be periodically replaced. Make sure to check the diagrams of your model for the exact location and the correct installation of this component. It is sold individually. You will need a screwdriver and a wrench set to take apart the housing in order to gain access to this flange bearing. Keep in mind the screws utilized to secure this component are sold separately.

This is a genuine Murray, Snapper, and Simplicity part sourced directly from the manufacturer for use in snowthrowers. The clutch spring boot is made out of rubber. A set of pliers may be necessary during the installation of this item. It may become broken and will need to be replaced. This is available as an individual replacement part.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

This is an OEM part sourced directly from the manufacturer. The bolt is commonly found on snowthrowers and snowblowers from Murray, Snapper, and Simplicity. This part is made of metal, and is generally used to secure the upper handle assembly to the lower handle. Please be aware that there are different bolts used in the machine. Refe...Read morer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. This part is sold individually.

This is an original Murry part for Snowblowers. The auger drive belt rotates the auger on the snow blower. The most common reason for replacing the drive belt is when the snowblower auger won't turn. This part is sold individually. The tool that you will need to replace the auger belt is a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.

This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. If broken, there may be a leak or blockage and the part should be replaced. The part may also need to be replaced according to manufacturer'...Read mores specifications, and is a manufacturer-approved part. Refer to your make, model and diagrams to ensure this part is correct.

This is a genuine Murray replacement part manufactured for use with snow throwers. The auger blade scrapes snow into the auger housing to be discharged through the chute. The blade is a wear item that needs to be replaced when worn from normal use. The auger blade is sold individually.

Auger drive cable, lower

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers. The special cable adjuster bracket is commonly used to link the motor and the drive cable and to provide different connection points to adjust for the length of the cable. This cable adjuster bracket is available as an individual replacement part, please see model diagram for associative parts.