620000X30C Murray Snow Blower - Overview

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

Grommet eye bolt .40

This is a genuine manufacturer-approved item that is specially designed for Craftsman snowblowers. It is an identical replacement for a missing or damaged knob that was originally installed on a new unit. The purpose of this component is to provide a user with a comfortable grip to secure the adjusting chute. Please make sure to refer to ...Read morethe appropriate diagrams of your model for the exact location and the correct installation of this component. Keep in mind this durable plastic knob is sold individually.

This authentic replacement part is designed for use with Murray, Simplicity and Snapper snowblowers. Flange bearings are used to provide support for a shaft while reducing friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Beari...Read morengs experience constant wear from pressure, heat, vibration, and friction. Because of this, many bearings need to be periodically replaced. Make sure to check the diagrams of your model for the exact location and the correct installation of this component. It is sold individually. You will need a screwdriver and a wrench set to take apart the housing in order to gain access to this flange bearing. Keep in mind the screws utilized to secure this component are sold separately.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special nut is used with a variety of types of equipment and the application of the nut varies depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

This is an OEM part sourced directly from the manufacturer. The bolt is commonly found on snowthrowers and snowblowers from Murray, Snapper, and Simplicity. This part is made of metal, and is generally used to secure the upper handle assembly to the lower handle. Please be aware that there are different bolts used in the machine. Refe...Read morer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. This part is sold individually.

Tire&rim 7x1.50

This is a genuine Murray replacement part manufactured for use with snow throwers. The auger blade scrapes snow into the auger housing to be discharged through the chute. The blade is a wear item that needs to be replaced when worn from normal use. The auger blade is sold individually.

This is an authentic Snapper replacement part. The scraper blade is designed by the manufacturer for use in snowblowers. This part is made of metal, and is secured to the base of the auger housing to scrape snow up into the auger assembly. You may require a screwdriver and power drill when replacing this part. This item is sold individually.

This is an original Murray replacement part. The bearing & plate assembly is designed by the manufacturer for use in snow throwers. This part is made of metal, and is placed in the side of the auger housing to allow the auger to spin freely. You will require a wrench when replacing this item. This part is sold individually.