618450 Kenmore Freezer - Overview

Metallic screw that is less than an inch long. Does not include the plastic washer.

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any inter...Read morenal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

Sold individually.

This is a 12oz (about 355 ml) can of black spray paint that is compatible with a variety of different home appliances and is used to cover and conceal any visible scuffs, scratches or chips. This can is sold individually, so consider how much paint you need for your appliances prior to placing an order. To use this spray paint, make sure ...Read moreto have the proper personal protective equipment, such as protective glasses or gloves, as well as a respirator. Clean the surface of whatever you are spraying before you begin and shake the can for 1 minute after hearing the internal mixing balls rattle. Do not spray during high heat or humidity, spray at room temperature and in several thin coats to ensure the best adherence.

This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.

Overload is sold separately. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

This compressor mounting kit is a set of components used to secure and support the compressor in refrigerators. The kit is supplied by the original manufacturer, and it includes 4 rubber grommets/bushings and 4 mounting screws. The rubber bushings function as buffers between the compressor and mounting brackets to reduce movement and nois...Read moree from the appliance, and the mounting screws hold the compressor in place to provide additional stability. Over time it is normal for these components to wear down or become damaged or loose, leading to increased vibrations, excessive noise, and potential damage to the compressor and surrounding parts. Disconnect the power supply and remove the rear appliance cover to access the compressor unit. Remove the mounting screws and lift the compressor out of the refrigerator. Carefully remove the rubber bushings off the unit and press the new ones into place. Place the compressor back in the refrigerator and secure it with the new mounting screws. Reattach the rear cover to complete your repair.

Sold individually.