618 (1982) Cub Cadet Lawn Mower - Overview

This Washer-Lock 5/16 is a silver metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter it is used to prevent the nut from backing off and becoming loose on the pulley shaft and is attached to the drive belt pulley assembly. You will know if you need t...Read morehis because your owners manual will specify it or the model number of your machine will correspond with this part. If the part is broken due to fatigue the shafts will free spin when they should be locked together and must be replaced.

This is a genuine OEM sourced part which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...Read morehis high-quality hex bolt is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the diagrams of your model for the correct location and application of this item. Keep in mind it is made of durable metal and is sold individually.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

This is a genuine OEM sourced replacement screw which is commonly utilized on MTD and Yard Machines lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this screw. This durable metal hardware is sold individually.

It is an authentic OEM which is sourced directly from the original parts manufacturer for various models of Snapper commercial lawn mowers. This part is used to hold the grass clippings from using the unit. It is made of high-quality fabric and is sold separately.

The metal screw attaches to the block steering. It is a genuine OEM sourced part which is specially designed for use with chippers, shredders, edgers, lawn tractors, and snowblowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man. This item is available as an individual replacement. A wrench will be necessary during the instal...Read morelation of this part. It will need to be replaced if it becomes stripped or broken.

This is a genuine replacement part that is sourced from the original manufacturer to be used with lawnmowers and snowthrowers. The special hub cap is used to cover and protect the wheel's bolt and end of the axle. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This is an authentic Snapper replacement part that is sourced from the original manufacturer for use with lawn mowers. The right arc clip attaches to the transfer rod and is made out of a durable material. During replacement, it may require a wrench and a set of pliers to help install this item correctly. It may become broken and will need to be replaced. This is available as an individual replacement part.

• For routing, inlaying and mortising in wood and other soft materials. Use with Dremel« 230 and 330 Router Attachments and 231 Shaper/Router Table. Made of high-speed steel. • Ideal for routing, inlaying and mortising in wood and other soft materials.