6123- - Overview

This is a genuine Broil-Mate, Broil King, Huntington, and Sterling part sourced directly from the manufacturer for use in gas grills. The grease shield goes next to the inner rear panel. A wrench and a screwdriver may be necessary during the installation of this item. It may become broken and will need to be replaced. This is made of metal and is available as an individual replacement part.

Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with angle grinders. The metal spring fits into the gearcase and is used to provide compression for the spindle lock button. This item allows the button to be pressed and keeps it in the upright position when not pressed. The compression spring is available as an individual replacement part.

This item has been sourced from the original manufacturer to be used with angle grinders from Milwaukee. The durable plastic tube fits into the grinder's gearbox assembly. The spindle lock tube is used to secure the spring and the spindle lock shaft. The tube is sold as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with grills/ It is an identical replacement for the bumper lid which will prevent any direct metal on metal contact, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware...Read more. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This is a genuine OEM approved replacement part used on Milwaukee angle grinders. This wrench allows you to secure or remove a grinding/cutting disk or wheel. Angular profile of this item makes tightening/loosening the flange nut easy. This spanner wrench is made from metal and it is sold individually.

The Flav-R-Wave is to protect your burners from food and debris, as well as to provide that smoky BBQ flavor by creating smoke when drippings fall on them.

Genuine Milwaukee replacement part, this item is sold individually. The 43-34-0036 Disk Flange is installed first on the spindle of the grinders listed below. You can then place the grinding wheel or cutoff wheel next. Then the threaded flange nut is tightened on to the spindle to hold the grinding wheel on the spindle.