6072 (703E) Milwaukee Sander Polisher - Overview

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. ? Worn brushes frequently are the cause behind a motor running poorly. ? Replacing brushes can fix a motor that's operating intermittently. ? New brushes can restore a motor's electric braking. Carbon brushes are one...Read more of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Genuine Milwaukee replacement part, it is sold individually. The 06-82-8864 screw is used in various places as a fastener. Commonly used in power tools, it is compatible with the models listed below. A Torx or flat head screwdriver is needed to properly tighten this screw.

This rubber, injection-molded handle is an authentic Milwaukee replacement part. It is used in a many power tools including sanders, nibblers, and polishers. This ergonomic side handle simply twists into/out of place with no tools required. For improved comfort, it can be moved to different locations on a tool easily and quickly. Sold individually.

This replacement brush tube is an specially manufactured for use with a variety of Milwaukee power tools. It is a genuine OEM part, not an aftermarket equivalent. This part is used to secure the carbon brush that is sold separately. It is made out of metal and it is sold individually. To complete this repair you will need a screwdriver ...Read moreand pliers. • First make sure the tool is unplugged • Remove the housing • Remove the carbon brush • Disconnect the wires • Remove the old tube • Install the new brush holder • Reassemble and test your tool

This is a genuine Milwaukee replacement part, it is sold individually. This Brush Retaining Screw (Brush Cap) is used on the model numbers shown below. The purpose of this part is to secure the brushes in the brush holder To remove this part ,simply use a flat head screw driver. Don't use too much pressure on it, they do have a tendency to break.

It is a genuine manufacturer-sourced item which is specially designed for use with Milwaukee power tools. The switch allows a user to turn the unit on and off, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is ...Read moresold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this part.

It is an authentic manufacturer-supplied item that is specially made for use with Milwaukee sanders and grinders. This is an identical replacement for a missing or a faulty shoulder screw that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hard...Read moreware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This part is provided by the original manufacturer for Milwaukee power tools. The metal bearing is used to prevent friction between moving parts, and usually goes inside a gear. The item includes one needle bearing, and please be aware any associated parts are sold separately. Please refer to your models parts diagram for any additional parts.

This is an authentic replacement part manufactured for use with Milwaukee grinders, sanders, and polishers. This special washer provides spacing on the spindle shaft for the hub adapter. The spindle washer is sold individually.

This item is priced as an individual replacement part. The bumper is made out of a durable material. It might require a screwdriver to replace this item. Over time it may break and will need to be replaced. This is an original Milwaukee part for use in grinders, polishers, and sanders.

It is a genuine OEM sourced item that is designed for use with Milwaukee power tools. This special bearing allows spindle shaft to rotate freely with minimal friction, over time the rollers of the bearing may begin to wear out and fail eventually requiring replacement. It is a high-quality component which is made of durable steel and it is sold individually.