6065 - Overview

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead and brush spring attached. 2 of these brushes are need for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon...Read more motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat,...Read more vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.

This is a genuine OEM sourced replacement part that is used with Milwaukee grinders and sanders. Its job is to protect the power cord from over-bending and kinking. Because it is made of rubber, the cord guard will eventually become brittle and begin to crack. Please note this high quality rubber cord protector is sold individually.

This cord is a genuine Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 14 Gauge • 9 Feet Long

Genuine Milwaukee replacement part, it is sold individually. The 06-82-8864 screw is used in various places as a fastener. Commonly used in power tools, it is compatible with the models listed below. A Torx or flat head screwdriver is needed to properly tighten this screw.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This rubber, injection-molded handle is an authentic Milwaukee replacement part. It is used in a many power tools including sanders, nibblers, and polishers. This ergonomic side handle simply twists into/out of place with no tools required. For improved comfort, it can be moved to different locations on a tool easily and quickly. Sold individually.

This spiral bevel pinion is the original part manufactured from Milwaukee. It is constructed of high-quality metal, and is compatible with several sanders and grinders. This part is most often, fastened between the hex jam nut and ball bearing within the sander housing. The spiral bevel pinion is used to transfer power to the spindle. A s...Read morecrewdriver is required to replace this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This part is sold individually.

It is a genuine manufacturer-sourced item which is specially designed for use with Milwaukee power tools. The switch allows a user to turn the unit on and off, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is ...Read moresold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this part.

It is an authentic manufacturer-supplied item that is specially made for use with Milwaukee sanders and grinders. This is an identical replacement for a missing or a faulty shoulder screw that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hard...Read moreware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an authentic Milwaukee replacement part, not an aftermarket imitation. This high quality service kit consists of (2) red plastic handle pieces and (1) mechanical switch that is responsible for the on/off function of the tool. Please note the hardware or lead wires are not included in this assembly, they are sold separately. Replacing service kit you will need a screwdriver.