If your refrigerators interior light is not working, the door switch may be the cause. It turns the light off when the door closes. This is an OEM part. Confirm compatibility using your refrigerators model number.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This appliance hex washer head screw secures brackets, hinges, or other mounted components in place. Its six-sided head provides a firm grip for a socket or nut driver, while the built-in washer spreads pressure across the mounting surface. A missing screw, stripped thread, or damaged head may allow attached parts to loosen, shift, or rat...Read moretle. Replacing a damaged fastener helps restore a secure attachment. Disconnect appliance power before servicing, support any attached components, and tighten carefully to avoid damaging the threads or mounting surface. This is an OEM part sourced directly from the manufacturer.
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets from potential damage. If your fridge is having issues opening or staying closed, check the hinges for any damage or cracking. To replace thi...Read mores bracket, simply remove the door off your refrigerator, unscrew and remove this bracket from the bottom of the door, and install the new one. This hinge bracket is an OEM replacement and is compatible with several different makes and models of refrigerator.
Keep the crisper drawer moving smoothly with this refrigerator right drawer slide rail. It supports the drawer along its right side and guides it as it opens and closes, helping maintain level, steady movement. Cracks, worn surfaces, or broken mounting tabs may cause sticking, scraping, sagging, or difficulty closing the drawer completely...Read more. Replacing a damaged track helps restore stable support and easier access to produce. Empty and remove the drawer before installation, release the retaining tabs gently, and lock the new rail securely into place. This is an OEM part sourced directly from the manufacturer.
A refrigerator or freezer drawer uses this left-side track for support and guidance as it slides. The OEM track snaps in and out of place. Check your appliance model to confirm fit.
This refrigerator recessed screw secures door handles or other mounted hardware to keep parts firmly attached during everyday use. Its threaded shaft grips the mounting point, while the recessed head allows a screwdriver to tighten or remove it. A missing screw, stripped thread, or damaged head may cause the attached part to wobble, shift...Read more, or rattle. Replacing a damaged fastener helps restore a secure attachment. Support the component during installation and tighten carefully to avoid stripping the threads or damaging the surrounding material. This is an OEM part sourced directly from the manufacturer.
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands. The ...Read morethermistor itself, part WPW10383615, should test at these Ohms depending on temperature. It's recommended to test at room temperature and again in a glass of ice water to make sure it's sensing temperatures properly. So it should read around 3000 - 5000 Ohms at room temperature 7000 - 10000 Ohms at 0°C and 20000 Ohms at -15°C.
A loose refrigerator door handle may need a replacement set screw if the original is missing, stripped, or damaged. It secures the handle and installs with a small Allen wrench. This is an OEM part.
To secure a refrigerator or freezer door handle, use this Phillips screw. Check that it is compatible with your appliance before ordering. It is an OEM replacement part.
This refrigerator door hinge washer fits over the hinge pin to maintain proper spacing and provide a smooth surface for door movement. It helps support the door while reducing friction between hinge parts. A worn, cracked, or missing washer may cause sagging, scraping sounds, or difficulty closing the door evenly. Replacing a damaged wash...Read moreer helps restore door alignment and smoother opening and closing. Empty the door shelves and securely support the door before removing hinge hardware, then check that the door swings freely after reassembly. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lights inside refrigerator not working
138 of 259 peoplefound this instruction helpful.
Clint from Rayville, MO
Really Easy
Less than 15 mins
Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
Light Switch broke
48 of 78 peoplefound this instruction helpful.
James Richard from St. Cloud, MN
Easy
Less than 15 mins
Socket set
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only
... Read moreswing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Read less
Was this helpful?
Thank you for voting!
Food was freezing in the fridge
35 of 39 peoplefound this instruction helpful.
John from VALHALLA, NY
Easy
15 - 30 mins
Screw drivers
Spoke to a repair technician online described what was happening as food keep freezing in the fridge. He advised me to change the thermistor and if that didn't work the control board as those are the only 2 things that would cause food to freeze. Changed thermistor and fridge is running at proper temp very disappointed with whir
... Read morelpool as fridge is only 2 years old and had issues already . Now that its repaired its Time for a COLD beer !!!