5KSM6521XEER0 KitchenAid Mixer - Overview

Diagrams for 5KSM6521XEER0

See every part. Know exactly what you need.

Parts for the 5KSM6521XEER0

$6.40

Dryer Retaining Ring

★★★★★

(3)

Part #WP9703438

This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substi...Read more

Read less

$8.55

Mixer Retaining Ring

★★★★★

(1)

Part #WP9703680

Used on Stand Mixers.

$8.55

Mixer Retaining Pin

★★★★★

(2)

Part #WP9707223

This part works in conjunction with the worm and bevel gear.

$8.55

Bowl Arm Lift

★★★★★

(11)

Part #WP9706885

This is a replacement bowl arm lift for your stand mixer. It raises and lowers the mixing arm in the bowl. It is made of white plastic and is sold individually. This part can also be known as the bowl lift arm adjusting bracket. This is an OEM part sourced directly from the manufacturer.

$8.55

Mixer Pingroove

Part #WPW10234531

This groove pin is a small but essential metal piece used in stand mixers to secure the internal gears and keep the planetary assembly firmly attached to the drive shaft. When this pin wears out or breaks, the beater may stop turning or feel loose during use. Replacing it restores proper mixing performance and keeps attachments running sm...Read more

Read less

$8.55

Mixer Foot

★★★★★

(1)

Part #WP9708649

Sold individually.

$8.55

Screw

Part #WP3400814

Sold individually.

$8.55

Mixer Bowl Retaining Pin

★★★★★

(1)

Part #WP240185

Used for Kitchenaid Stand Mixers.

$8.55

Washer

Part #WP9706090

$10.70

Pin Groove .250 X .625l

Part #W11664709

$8.55

WASHER

Part #W10854966

$23.60

Agitator Shaft

Part #WP9708191

This agitator shaft transfers power to the agitator for effective washing performance. Designed for long-lasting strength, it supports proper movement and helps maintain consistent cleaning results when the original shaft becomes worn or damaged.

Common Symptoms of the 5KSM6521XEER0

How this model fails, and the parts that fix it.

Noisy

Fixed by
these parts

Show All

Videos related to models starting with 5KSM6521XEER0

Watch our pros, then fix it yourself.

Replacing the Dryer Retaining Ring

Replacing the Bowl Arm Lift

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The mixer would not raise the bowl

12 of 19 people found this instruction helpful.

Stephen from Charlotte, NC
Easy
1- 2 hours
Pliers, Screw drivers

I removed the motor assembly from the mixer. This left the stand assembly. The raising lift arm had to be removed by unscrewing the set screw, and then the lift arm was removed. I replaced the plastic arm bowl lift by sliding it over the lift arm, and then I had to remove the spring with a clip washer with the pliers, and replaced the spr ... Read more

Read less

Was this helpful?

all four feet on mixer damaged

5 of 7 people found this instruction helpful.

ROBERT from ENDWELL, NY
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers

I first ahd to remove the original feet by removing screws that held them in place. The new feet that I purchased were different then the original. They were a push in type and not held in by screws. I had to modify the base by drilling the foot holder to accept the new style feet. Once this was done, the feet were installed and looke ... Read more

Read less

Was this helpful?

dough mixer paddle not turning.

3 of 5 people found this instruction helpful.

Iftikhar from PACIFICA, CA
Really Easy
30 - 60 mins
Nutdriver, Screw drivers

Connecting pin broken replaced. Tested unit works fine.

Was this helpful?