5900598 Simplicity Lawn Mower - Overview

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

Switch push button no/nc snap-in

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

It is a genuine manufacturer-sourced component which is specially made for use with Murray, Snapper and Simplicity riding lawn mowers and garden tractors. It is the part of the equipment that allows a user to engage and disengage the blades. Unfortunately, over time components will wear out and may begin to fail eventually requiring a rep...Read morelacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

This is a genuine item that is supplied by the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or faulty bearing brongze flang that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this hardware. This high-quality component is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is an authentic replacement part manufactured for use with rear engine mowers and lawn tractors from Craftsman. The user will need to replace this hex nut if it is missing or not working correctly. This hex nut screws onto the transmission link lever. This part is made of durable material and sold individually.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This is an original replacement part manufactured for use with small engines. The metal hose clamp is used to secure the vacuum hose. One clamp is required for each end of the hose, this clamp is sold individually.

Bearing ball axle