58RIAD Whirlpool Refrigerator - Instructions

Removed 4 screws, pulled unit out of slots, unpluged control wires plug and removed from fridg. Removed 3 screws that hold the motor module to unit. Then reversed procedure and had the batch of ice cubes one hour and fifteen minutes from the time I started replacement.

exact part in with the new out with the old

I determined that the plastic lever inside the icemaker was broken and I found the part easaly. It was farelly inexpensive considering the important job the ice maker does, so I order it and paid for the standard, 5-8 days delivery. To my surprise, it was delivered (to my neighbors house thanks to the delivery person) the next day. Once Berry the neighbor delivered it to my house, 15 minutes later ice was being made. I had to remove one screw and losen two on top of the icemaker, disconnect power and remove the icemaker. I don't think that this step was even required but I wanted to remove all of the old ice from the maker without thawing out the freezer. Replacing the part itself also required removal of three screws. I think that almost anyone can do this easily (with or without Berry).

removed icemaker timer/controler replaced with new part.reinstaled it works perfectly

My husband is a plumber...but did not have time to make the repair. So I took it upon myself!

Super Easy!

1. Unplugged Fridge
2. Unscrewed the 3 screws on motor
3. Pulled out old motor
3. Had to pour some hot water to melt ice cubes that were currently in the shoot. (because the new part would not line up correctly because of the frozen cubes inside the maker). Then soaked up all the water with towels.
4. Inserted the new motor
5. Put 3 screws back in.

ICE, ICE BABY! Within a couple hours it was dropping ice into the bucket! Husband came home, and I told him I fixed the ice maker (his expression was of dread)...and then he checked it out and all was perfect! So proud!

3 Years ago our icemaker stopped working and we paid a professional $225.00 to come and repair. This time I chose to investigate the problem on line and PartSelect website gave me info on the motor assembly that may be the problem. Sure enough I purchased the part, it was delivered in two days. My husband installed the control & motor assembly in less than 15 minutes. We had ice within hours. Thanks for saving us a service call and the expense. The Goldbergs

replaced icemaker motor.easy peasy

I removed the two screws that hold the ice maker door. I then removed the single screw on the right underside of the ice maker. I depressed the plastic "catch" on the left underside of the assembly and the whole thing just pulled straight out. I then disconnected the wire harness.

The module cover is removed, then the module itself is easily removed by removing three screws.
The assembly is just as easy.

A few hours later, I had a half bucket of ice!

Went very easy, watched the video from the web site and did what it showed to do and put it together and it worked.We now have ice.

First I replaced the thermostat. (from this company.) Same thing happened. Then I thought the ice heater has too low voltage and does not melt it for extraction. So, I put a short on the relay on the beam receiver board. No difference. Then completely disassembled the ice maker, and discovered the shaft cracked on the plastic gear, which rotates the ice extractor. So, I ordered and received this control assembly. Put together the unit and having ice again. Due to the cracked gear the thing was out of timing. This gear drives the contactor for letting water in, freezing time, heating the ice, (so it slides out easily), etc

Removed ice maker from freezer area. Motor in ice maker was not rotating ice dump bar. Replaced control and motor assembly. Problem solved.

I actually went on your website and used the do it yourself repair video as a step by step guide to complete the repair. It was as easy in real life as it was presented on the video. I will use this website to buy and repair future issues I may face with my appiances.

Disconnect power cord turn off water supply. Remove four screws on bottom of ice maker unit.Then look for locking clips on bottom of @ near supports and remove unit sliding & cocking until you can turn motor toward you cord is just long enough pry motor control off with hand or flat blade screw driver buy pressing on side edges.Remove motor from unit by removing three screws & pull out of plug on one corner. [side by side unit not freezer over fridge like video].

Repair was easy and the video on PartSelect was spot on. Basically you take the unit out of the freezer, undo three screws, take out the old motor assembly and put in the new one, replace the screws, and put back in the freezer. Simple.

Initially, I took the ice make out of the refrigerator. It required removing two screws in the service door and one on the right side under the ice maker to remove a plastic cover for the wiring. There are plastic retainers under the left and right sides of the ice maker that must be pressed to release them so the ice maker can be removed. I had to unplug the wiring at the upper right of the ice maker (the plug has clip that you can slide a small screw driver into to release it and pull the plug apart). Once the ice maker was out I removed the white cover on the left side and it exposed the module. I found the shaft that holds the gear was broken. When the part arrive, I removed the existing module (three screws) and installed the new module. I reversed the ice maker removal process.