58652 Dynabrade Sander - Overview

This is an authentic OEM part made for various Dynabrade. It fits various handheld power tools including sanders, grinders, and buffers. Bearings are used to provide reduced friction for moving parts while keeping them stabilized and in place. They are high-wear pieces which are commonly replaced. This part is sold individually.

This is a genuine Dynabrade replacement part. The bearing is commonly found in sanders and grinders. This part is made of metal, and is generally placed in the machine to allow the motor shaft balancer to spin freely. Please be aware that there are different bearings used in the machine. Refer to the parts diagram to be sure of orderi...Read moreng the correct part. You may require a screwdriver or pliers when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This part is an OEM from Dynabrade. The metal pin is compatible with many grinder and sander devices. The pin helps to fasten the throttle lever assembly to the housing. This item is sold individually. A pair of needle nose pliers may be needed for the removal and replacement.

It is a genuine OEM approved replacement part which is specially designed for use with Dynabrade equipment. This wrench allows a user to secure or remove the hardware, please make sure to check the user's manual for the correct application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.

This felt washer is a genuine replacement part supplied by the original equipment manufacturer. It is compatible with over 150 models of Dynabrade sanders. This small flat ring is useful in between bearings of the machine. It is made of felt, and it should be replaced if needed.

This is an authentic Dynabrade replacement part manufactured for use with pneumatic sanders. Seals on pneumatic tools can wear out over time from compression between part assemblies, or from weathering caused by exposure to chemicals or water. This seal is commonly used between the balancer shaft and lower bearing, please see model diagram for associative parts.

This is an authentic OEM sourced part which is specially made for use with Dynabrade sanders. It is an identical replacement for a missing or a faulty retaining ring that was installed on a new unit. The purpose of this part is to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the co...Read morerrect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.