577PEMC Shindaiwa Chainsaw - Overview

This spark plug is is a high quality item commonly utilized on Echo and Shindaiwa gas powered lawn and garden equipment. The purpose of a spark plug is to deliver the electric current from an ignition system to the engine. Over time spark plugs tend to get dirty or fouled eventually requiring replacement. Please note, one item is included...Read more per order. Replacing a spark plug you will need a spark plug wrench or a socket wrench.

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

This replacement fuel pipe is a high-quality OEM sourced component which is specially designed for use with Shindaiwa chainsaws. The purpose of this tube is to deliver the fuel from the tank into the carburetor, it is the line that the fuel filter is attached to. When you press the primer bulb, it will purge all the air out of the carbure...Read moretor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line which is sold separately. Over time fuel pipes tend to become brittle and may crack eventually requiring replacement, please note this durable plastic item is sold individually.

This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This is an authentic Shindaiwa replacement part manufactured for use with backpack blowers and chainsaws. The pre-filter fits around the main filter and is used to collect dust and debris before it gets to the main filter. This foam filter can be cleaned, but over time it will need to be replaced. The pre-filter is sold individually.

This manufacturer approved Spark Plug Terminal Cap is a part that is located inside the spark plug boot, and attaches to the spark plug to transfer the electrical current between the two. If broken, the spark plug will no longer get the electrical current it needs, and the part must be replaced. Installation is rated as "Easy" by customer...Read mores and requires pliers. This bronze, metal part is electrical and comes individually sold. Refer to your make, model and diagrams to ensure this is the correct part for you.

This item is available as an individual replacement part. The adjusting stud attaches to the guide plate and is made of metal. A screwdriver may be helpful when replacing this part. This item may become broken and will need to be replaced. This is an Echo and Shindaiwa replacement part directly sourced from the manufacturer for use in chainsaws.

This is an authentic Shindaiwa replacement part that has been sourced from the original manufacturer to be used with chainsaws. The filter assembly connects to the cleaner base and is used to prevent contaminant from entering the engine's air intake. Tools may not be needed to install the filter and it is sold as an individual replacement part.

This is an original replacement part manufactured for use with outdoor power equipment. The strainer is used with many different types of equipment and is commonly used in the carburetor fuel system. This strainer is available as an individual replacement part, please see model diagram for part location and usage.

This authentic item is supplied by the original equipment manufacturer for use with Echo and Shindaiwa chainsaws. The gasket is utilized to provide a tight seal for the fuel pump, unfortunately, over time it will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality part is made of durable compo...Read moresite material and is sold individually. Please make sure to refer to the owners manual and the diagrams of your model for the correct location and application of this gasket.

This is an original replacement part sourced directly from the manufacturer. The cushion is found in Shindaiwa chainsaws and cut-off saws. This part is placed on the sides of the rear handle engine housing to reduce vibration in the machine. You will require a screwdriver when replacing this item. The cushion is sold as an individual replacement part.