560Z Snapper Lawn Tractor - Overview

This is a genuine OEM sourced replacement exhaust gasket. It is specially made for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. Its purpose is to provide an air-tight seal between the carburetor and the exhaust tube. Over time this gasket will deteriorate requiring replacement. Please note, this co...Read moremposite gasket is sold individually. To replace this part you will need a wrench.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

The Murray Switch Dp No/Nc Snap is an essential component for your lawn tractor. Known for its rugged durability, this quality push-button snap-in switch is designed to sense when the parking brake is applied. This feature ensures that you can safely start your lawn tractor each and every time. Please remember to wear work gloves during t...Read morehe installation process to protect your hands. Invest in the unparalleled reliability of Murray parts for a safer, smoother lawn care experience. Trust in the Murray Switch Dp No/Nc snap to keep your lawn tractor operating at its best.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

It is a genuine manufacturer-sourced component which is specially made for use with Murray, Snapper and Simplicity riding lawn mowers and garden tractors. It is the part of the equipment that allows a user to engage and disengage the blades. Unfortunately, over time components will wear out and may begin to fail eventually requiring a rep...Read morelacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The solenoid support engages and routes the battery electrical supply to the engine starter when the ignition switch is turned to the start position. This part is made of hard plastic and metal, it is also s...Read moreold individually. The tools you will need for this repair are a screwdriver and socket wrench.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

This blade is an authentic Simplicity replacement part and is compatible with riding lawn mowers. The blade allows you to cut with precision and is made of metal. Though the blade is sold individually, it is a common ware item, so we recommend ordering a spare. Start by removing the blade guard, then press the blade locking pin and turn t...Read morehe blade until it can no longer move. Use an Allen wrench to remove the blade bolt and then the flange. Place the new blade in, replace the flange and bolt. Lower the guard mounting hardware and tighten the screw back into place.

Wheel gauge