560XPGMARKII Husqvarna Chainsaw - Overview

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this component. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.

This authentic OEM rim sprocket in your chainsaw transfers power from the engine to the cutting chain. It is typically located at the center of the clutch drum, situated at the end of the engine crankshaft. By engaging with the chain drive links, it enables the chain to rotate and cut through materials as the engine turns. You will notice...Read more that if the rim sprocket is broken that the chain slips, does not engage, or rotates unevenly. It may also reveal signs of wear such as worn-out teeth. Failure to replace a broken rim sprocket can result in reduced cutting power, chain damage, and increased strain on the engine. To remove the rim sprocket, first, loosen the chain tension by adjusting the tensioning screw or knob. Then, remove the guide bar by loosening the nuts or clips on the side cover and sliding the guide bar off the saw. Use a screwdriver or appropriate tool to remove the screws or fasteners securing the clutch cover. With the clutch cover removed, you can access the clutch drum. Hold the drum in place and turn the retaining bolt counterclockwise to loosen it. Carefully slide off the clutch drum. This replacement part is sold individually.

Primarily used in chainsaws, this Starter Rope is an exact replacement part for hundreds of models. It is white and sold individually, not as part of a kit or assembly. The Starter Rope will need to be replaced once you notice signs of it fraying, wearing, or it breaks off. Customers rate this repair as Easy.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with trimmers and chainsaws from Husqvarna. The spark plug is threaded and screws into the cylinder. The plug creates an electric arc that ignites the fuel/air mixture inside the combustion chamber. A spark plug wrench is needed to install this item.

This is a genuine OEM sourced replacement hardware, not an aftermarket imitation. It is specially made for Husqvarna chainsaws. This screw is generally used to secure the starter housing. Please note, this torx screw is sold individually. To install or remove this hardware you can use either a flat-head screwdriver or a torx screwdriver.

This replacement nut is high quality hardware that is specially manufactured for use with Husqvarna chainsaws. It has multiple applications depending on your tool, please make sure to check appropriate diagrams for correct location and use of this item. Note this durable metal item is sold individually.

It is a genuine part that is supplied by the original equipment manufacturer for Husqvarna chainsaws. The purpose of the vent tube is to allow air into the fuel tank so that a vacuum is not created when the fuel is being fed through the fuel line. It is an identical replacement for a missing or a faulty part that was installed on a new un...Read moreit. To ensure the proper replacement procedure, refer to the appropriate diagrams for your model. It is a high-quality fuel tank vent which is made of durable plastic and is sold individually. Replacing it is a simple task that should not require any special tools. Disconnect the old vent from the hose and connect the new one.

This authentic item is supplied directly from the original equipment manufacturer for use with chainsaws made by Husqvarna and Jonsered. The spring attaches to the throttle control. A set of pliers may be necessary during the installation of this part. It is made of metal and will require replacing if it breaks or stretches. This is available as an individual replacement part.

This is a genuine manufacturer-sourced replacement part which is specially designed for Husqvarna, Poulan and Jonsered chainsaws. The purpose of this spring is to apply tension on the catch which is sold separately. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed...Read more on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Note, this high-quality lock spring is made of durable metal and is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with chainsaws from Poulan and Husqvarna. The rim is used to link the chain and the clutch drum to rotate the chain around the bar. This item is sold as an individual replacement part.

This is an authentic manufacturer-sourced replacement component that is specially designed for use with Husqvarna handheld lawn and garden equipment. It helps to provide an air-tight seal between connected pieces, please make sure to refer to refer to the appropriate diagrams of your model for the correct location and application of this ...Read morehardware. Keep in mind this high-quality item is made of durable rubber and is sold individually.