Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers...
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard siz...
This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive be...
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manu...
This is an authentic manufacturer-sourced item that is specially designed for Murray and Simplicity snowthrowers. It connects the control lever to the clutch in the drive system allowing a user to eng...
It is an authentic OEM part which is specially designed for Murray, Snapper and Simplicity snowblowers. This bearing secures and stabilizes moving parts to ensure proper rotation angle and position. U...
This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for r...
This genuine item is supplied by the original equipment manufacturer for use with Murray, Simplicity and Snapper lawn mowers. It is the special retaining ring for the wheel. If the hardware is missing...
This is an authentic replacement part manufactured for use with Craftsman snowblowers. The special skid shoe is used to protect the auger housing from grinding on the ground, and the height of the ski...
This is available as an individual replacement part. The auger bearing connects to the auger plate and is made of plastic. If this part becomes broken it will need to be replaced and may require a scr...
This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dean
November 21, 2022
How difficult is it to change the auger belt?
For model number 536887990
Hi XXXX,
Thank you for your question. This repair is not too difficult. Before doing this repair, make sure that the engine has cooled and to prevent the engine from accidentally starting, remove the wire and boot from the spark plug. When doing this repair, make sure there is little or no fuel in the tank. To start, remove the screws securing the belt cover, so you can remove it. Then remove the belt from both the auger drive pulley and the idler pulley. Then, tip the snowblower forward, so that it rests on the auger housing and remove the frame cover. Then use a wrench to loosen the belt retaining bolt, so you can remove it. Next, depress the drive lever and use a clamp to hold the lever in place. Then remove the auger belt from the drive pulley and lift the drive plate to remove the old belt. Then feed the new belt under the drive plate and through the housing. Then loop the belt onto the auger drive pulley and remove the clamp to release the drive lever and reposition the belt retaining bolt and tighten it. Then reinstall the frame cover and secure it with the mounting bolts. Put the snow blower back in the upright position and align the new belt on the engine drive pulley and the idler pulley. Then reattach the belt cover and secure it with the screws. With the repair complete, reattach wire and boot to the spark plug and fill the tank with fuel. The snowblower should now work for you. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Did this question help you?
Thank you for voting!
Joe
October 28, 2022
How do I install a idler traction drive spring?
For model number 536887990
Hello Joe, Thank you for writing. The easiest way is to attach one of the ends to either the drive lever or the idler pulley bracket then have a strong piece of string tied to the other end of the spring then pull it into place. Best Regards
Did this question help you?
Thank you for voting!
David
October 27, 2022
Is there a compatible METAL chute that will fit my machine. The plastic one always cracks, over time, at the mounting holes.
For model number 536887990
Hello David, Thank you for the question. This part is made from durable plastic. Very sorry we do not list a Metal Chute. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
Did this question help you?
Thank you for voting!
Rick
October 7, 2022
I have a Craftsman 9 hp electric start 29-inch dual stage snow thrower. The wheel pin is 25 x 1.38. Will part # 500016ma replace it.
For model number 536887990
Hi Rick,
Thank you for your question. This wheel pin is listed under the model number you provided and would be an exact replacement to the original. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Did this question help you?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel.
... Read more This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
