536773500 Craftsman Trimmer - Overview

This mandrel housing is for lawn tractors. Mandrel housing houses the shaft that spins the blade. Wear work gloves to protect your hands when installing this part.

The throttle control, otherwise known as a throttle cable, controls the speed of your engine. This is an OEM throttle control that is black and silver in color, and made of metal with a rubberized coating. The cable can become broken, stretched, or worn over time, which will no longer allow you to have control over your engine RPMs. Thi...Read mores will require a repair, which most of our customers found easy. You will need a screwedriver and wrench set to carry out this repair, which requires attaching the cable to the carburetor and throttle trigger.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This drive belt links the engine drive pulley to the cutting head pulley to drive the cutting head of your trimmer. This OEM drive belt is black in color and made of rubber, which is why it can crack and break over time through stress and use. When the belt starts to crack or stretch, you will no longer be able to drive the cutting head o...Read moref your trimmer, and the part will need to be replaced. The installation of a new belt is rated as easy by our customers, with only a screwdriver and socket set required. Attach the new part around the engine drive pulley and the cutting head pulley.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

The latching control cable engages and disengages the cutting head of your trimmer. It is sold individually and is manufacturer-certified as an OEM part. It is made of metal with a rubberized coating, and can become stretched, broken, or otherwise damaged over time, which will cause you to lose control of the cutting head.

This is an authentic product that is supplied by the original equipment manufacturer for Murray string trimmers. The height guide is the bottom of the cutting head and prevents the cutting disc assembly from contacting the ground. This height guide is made of durable material and is available as an individual replacement part. Make sure t...Read moreo refer to the appropriate diagrams for your model to ensure the correct repair procedure. Note, the hardware to secure it is sold separately.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This is a genuine OEM sourced hardware, it is not an aftermarket equivalent. This high quality item is specially designed for use on Murray riding lawn mowers and tractors. This screw has multiple applications depending on the model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench to install or remove this screw. One item is included per order.

The Debris Flap is a plastic part used to deflect trimmings and debris. It is individually sold, comes in black, and is rated as "Easy" to install. You will only need a Screwdriver to install it. You'll know if you need a new one if trimming and debris are flying everywhere, as this means the part is broken, damaged, or missing altogether...Read more. Refer to your make, model, and diagrams to find the right part. It will attach directly to the guard.

Pulley engine 3l - t

The Cutting Disc Assembly is an individually sold, black, plastic part. Its installation is rated as "Easy", and will require a Screwdriver, Pliers, Socket set, and Hex Wrench to install. This part holds the string to cut grass, and if broken, the cutting string will not be able to attach. This may occur due to general wear/fatigue/damage...Read more to the part. Consult your owner's manual, or look up your make and model to ensure you're choosing the right part. It will attach to the upper weed wrap and the guide assembly.