536772101 Craftsman Edger - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind edgers. The belt links the motor's drive shaft and the blade's quill assembly. This item allows the blade and the drive shaft to rotate in unison. This belt is priced as a single item.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This is an authentic OEM sourced replacement part designed for use with Murray edgers. It is purpose is to cut grass, making it perfect for edging level ground around sidewalks and driveways. If the blade becomes dull or damaged it should be replaced to effectively cut the grass. This blade is made from durable high quality metal and it is sold individually.

This replacement screw is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This is a high-quality co...Read moremponent which is made of durable metal and it is sold individually, the washer is included.

This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on a new unit. This is a standard hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your mode...Read morel for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold in a pack of eight.

This genuine manufacturer-sourced part is designed for use with Murray, Snapper and Simplicity lawn mowers. It is a standard component which may have multiple applications. To ensure the exact location and the correct application of this knob refer to the diagrams of your specific model. This high-quality part is made of durable plastic a...Read morend is sold individually. Keep in mind the hardware to secure it is sold separately.

This is an original Murray replacement part. The belt guard is designed by the manufacturer for use in edgers. This part is made of high-quality plastic, and is placed to cover the belt that drives the edger blade. You may require a screwdriver or wrench when replacing this item. This part is sold individually.