53190119 General Electric Washer Parts & Repair Help | PartSelect
Models > 53190119

53190119 General Electric Washer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(12)
PartSelect #:PS270835
Manufacturer #:WH1X2117
The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip....
$4.50
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(6)
PartSelect #:PS270803
Manufacturer #:WH1X2026
This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise....
$8.90
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(6)
PartSelect #:PS270305
Manufacturer #:WH13X81
This washing machine water inlet valve has two ports for water to enter.
$26.79
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(6)
PartSelect #:PS271127
Manufacturer #:WH1X2757
This part is the replacement timer knob for your washer. It is made of white plastic and is about 1 ¼ inches in diameter. The timer knob sits on the timer shaft and allows you to c...
$21.91
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
PartSelect #:PS271609
Manufacturer #:WH2X650
This compression ring works in conjunction with the timer dial.
$14.30
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(2)
PartSelect #:PS271344
Manufacturer #:WH23X42
This washing machine pump is white in color and has four ports for water to pass through.
No Longer Available
(2)
PartSelect #:PS270786
Manufacturer #:WH1X1944
This coupling is used for 20 spline drive shaft transmissions.
$44.37
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(2)
PartSelect #:PS270806
Manufacturer #:WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of t...
$10.57
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
(1)
PartSelect #:PS271187
Manufacturer #:WH1X484
$6.57
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
PartSelect #:PS271126
Manufacturer #:WH1X2756
This knob accepts a D-shaped shaft.
$31.18
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Questions and Answers for 53190119
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

GE washer no spinning during spin cycle

V-Style Drive Belt – Part Number: WH1X2026
  • Customer: Laurence from Bronx, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 159 of 174 people found this instruction helpful
Used the spatula to release the front panel (push flat spatula under top about 2 inches from either side to release the two sprng clips holding the front panel on) to expose the tub and motor assembly. Inspected the belt and it seemed worn and a lot of rubber particles were in base of machine. Ordered the belt from partselect - received it two days later. Lo... read more

washer was not agitating or spinning

V-Style Drive Belt – Part Number: WH1X2026
  • Customer: Rachelle from Kent City, MI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 58 of 62 people found this instruction helpful
My washer was making noise but not agitating or spinning on any of the cycles that I turned the dial to. Didn't know if it was the transmission or something simple. I did some research and discovered it may be the belt, even though the belt looked new, I changed it anyway by just removing the front of the washer and cutting the belt off and putting the new b... read more

old water pump was leaking, needed replacment

Four Port Pump – Part Number: WH23X42
  • Customer: LLOYD from Moffett Field, CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 44 of 46 people found this instruction helpful
## WHAT I WISH I'D KNOWN BEFORE I STARTED ##
1. Remove the four hoses first.
2. remove the three screws holding the pump to the structure above BEFORE loosening the flex clamp.
3. with the pump free of the hoses and rest of the washer, then remove the flex coupling clamp from the pump end only; do not remove the flex coupling from the motor.read more