Genuine Husqvarna replacement part, this part is sold individually. The 503939601 Air Purge does just what the part name says. It purges the air out of the carburetor. Then it forces fuel from the fuel tank and fuel line in to the carburetor.
This is an authentic OEM sourced replacement part that is intended to be used with trimmers, brushcutters, and edgers from Husqvarna and Jonsered. The metal nut is used with several different types of machines and the application of the nut can vary based on the model of the equipment. This nut is sold individually.
This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article an...Read mored video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.
It is an authentic OEM sourced hardware that is commonly utilized on Husqvarna handheld trimmers and blowers. This screw has multiple applications depending on unit, to ensure correct use of this hardware please make sure to check appropriate diagrams. Please note this hex socket head screw is sold individually.
Power reaches a trimmer or brush-cutter head through the driveshaft inside the outer tube. Bent metal or worn splines may cause rattling, slipping, poor cutting, or no head movement. Check the clutch and gear head before ordering a replacement because they can create similar symptoms. Match the shaft to the full equipment model and parts ...Read morediagram. Shut off the tool, disconnect the spark plug wire or remove the battery, wear gloves, and make sure both shaft ends engage fully before reassembly and testing.
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this component. Keep in mind this high-quality nut is made of durable metal and is sold individually.
This is a genuine OEM replacement backing flange which is specially produced for use with Husqvarna trimmers and brush cutters. This part helps to secure the cutter blade to the drive shaft, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality metal and it is sold individually.
This is an authentic replacement part manufactured for use with Husqvarna brushcutters and trimmers. The driver assembly fits on the bottom of the gear case and is used to cover the spindle and bearings. This driver assembly is sold as an individual replacement part.
This stop button is a safety feature used in various types of lawn and garden equipment. It is a genuine OEM replacement part which is responsible for quickly shutting off the engine in case of an emergency or when it is no longer in use. The stop button is fitted into the handle controls for easy access. If the stop button becomes damage...Read mored or dislodged from its position, you will not be able to stop the equipment in an emergency. Therefore, it is important to replace the faulty stop button promptly to ensure that this emergency measure remains available, and avoid injury to the operator. Before beginning the repair, ensure that the equipment is turned off. Disconnect the stop button wires and detach the old stop button from the handle controls. Plug the new stop button in in place and reconnect the wires. If your equipment has fasteners with hex sockets, you will need to use a hex key/Allen wrench to remove and install the stop button. Ensure that the button is fitted securely before attempting to use your equipment again.
This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.
This threaded plug bolt is a precision-designed component used to securely seal lubrication ports in gear housing assemblies on outdoor power equipment. Engineered with durable, corrosion-resistant material, it helps retain essential grease while preventing dirt, moisture, and debris from entering sensitive internal components. Its thread...Read moreed design ensures a tight, vibration-resistant fit, supporting long-lasting performance and proper gear protection. Ideal for maintenance or repair, it helps preserve smooth operation and extend the life of gear-driven systems.