EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

52003 Amana Microwave - Overview

Diagrams for 52003

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$8.95
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
Part #WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Heat Resistant Adhesive – Part Number: W10841140
$18.22
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Nut – Part Number: M0282009
$21.45
Special Order
Nut
Part #M0282009
This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is a serrated pattern along the edge of the nut, which helps to avoid loosening while the appliance is in motion. Nuts may corrode or rust over time and will need to be replaced. You will need a wrench to screw the nut into place. This genuine OEM part comes directly from the manufacturer.
Screw, 6-32 X 1/2 – Part Number: W10142650
No Longer Available
Screw, 6-32 X 1/2
Part #W10142650
Nut – Part Number: WP3195558
$10.70
Special Order
Nut
Part #WP3195558
Capacitor – Part Number: 59001651
$50.55
In Stock
Capacitor
Part #59001651
Nut – Part Number: M0282005
$10.70
Special Order
Nut
Part #M0282005
.187 DIA POP RIVET STEEL – Part Number: 5067-A
No Longer Available
WIRE CLIP – Part Number: B5667304
No Longer Available
WIRE CLIP
Part #B5667304
DISCONTINUED – Part Number: 94115P01
No Longer Available
DISCONTINUED
Part #94115P01
KIT, STIRRER MOTOR – Part Number: M12D82
No Longer Available
KIT, STIRRER MOTOR
Part #M12D82
DISCONTINUED – Part Number: M16D97
No Longer Available
DISCONTINUED
Part #M16D97

Exact Part matches for your search term

OBS B & S 8HP – Part Number: 52003
No Longer Available
OBS B & S 8HP
This part number matches the current model number 52003
Part #52003
REPLACEMENT PUMP (UP15-18) – Part Number: 52003
$258.94
Special Order
REPLACEMENT PUMP (UP15-18)
This part number matches the current model number 52003
Part #52003

Common Symptoms of the 52003

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave oven blew fuse
27 of 43 people found this instruction helpful.
  • tad from tamarack, MN
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Was this helpful?
Thank you for voting!
microve stopped working
15 of 30 people found this instruction helpful.
  • Denice from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Was this helpful?
Thank you for voting!
Died while heating lasagna
9 of 17 people found this instruction helpful.
  • connie from madison, NC
  • Really Easy
  • Less than 15 mins
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
Was this helpful?
Thank you for voting!